Forum: LSX Truck Conversions

Building up an LQ4 and was wondering if an LS2 90mm intake mainfold will work? With some tuning?:bash:

Any trick to make for easer refilling the system with coolant and keep from getting air pocket. I here on these new systems you can air pocket real...

kind of found out today i am pretty much on my own installing this bad boy, and of course, as you gyus can probably tell reading any of my previous...

will i have to use a ls1 power steering pump on my 79 p/u to have power steering? i was told the old style power steering pump will not work, but...

can you see a problem with mounting the ECM and fusebox under the hood? instead of having to run the wiring through the firewall and then through...

Does anyone have access to technical data regarding the pulley offset distances between the corvette, gto, and truck accessories? I need to make a...

Does any body know what the cam specs are for a z06 cam?????

I read in a previous post that www.sbcperformance.com does full swaps for $4000. I am from south east missouri and I was wondering if there were any...

lookinn to buy a torque converter. anybody know a good place to go and how do i pick wichone i need? :help:

I would like to know if the gap between the flex plate and starter gear is too much. I am not sure but I think it is ok because the gear on the...

Well I inherited an 83' Suburban 3/4 2wd from one of my Arab buddies here ( nice guy eh?!) which needs a ton of work. One of the things I plan to...

Now that I am putting an LS1 in my 71 chevy truck I need to know what fuel pump I should use and where it needs to be mounted. Is it ok to mount it...

I'm about to install an Ls6 into my '86 silverado, has anyone used the TBW setup or does everyone just convert to the conventional throttle cable?...

I was just told by a guy that I will need to change the oil pan on the 2001 LS1 that I am putting into my 71 1/2 ton p/u. I disagree with him. Maybe...

Just wondering what goes here. I am not sure.....I thought it was the EGR but that goes behind the throttle body....right? There is another one on...

I just bought a flex plate for the LS1 to bolt up to the tranny but I am not sure if i need a pilot extension......Any one know if it is needed.

I know I saw a list some where, don't remember where.... but I need the torque specs for the bolts on the fly wheel that go to the cam and also the...

Not sure if this will work or not but I am wondering if the alternator from an 02 HD will work in an 01 lS1?

What v8 swap I can do with a budget of $5000 once again my truck is a v6! :cool:

Well Guys, I am almost ready to get my truck back from its recent conversion and I may have another snag. I have had my wiring guy also make my 4x4...