Forum: LSX Truck Conversions

Where the hell can i get a t-56 tranny besides ebay ne clues? thanks all

Power steering is connected as follows, ps pump to cooler and out of cooler into steering column, out of steering column into reservoir up by brake...

DO YALL KNOW ABOUT HOW MUCH THIS WOULD COAST ME TO PUT THIS IN A 89 SINGLE CAB SWB??:confused:,I NOW WHAT I HAVE TO GET BUT NOT WHAT ITS GOING TO SET...

I remember the older GM vehicles would use Dexron II for PS fluid. Ref: '02 f-body LS1 in a '92 2wd. Does the pump on the LS1 use the same???...

I just picked up my 6.0 truck motor today and it had hard oil cooler lines coming out, I have searched everywhere for the plate so I can drill and...

I have an LQ4 with all the stock accessories. I am considering adding two ceramic heaters to the car for defrosting purposes. the truck probably uses...

Man that was a nightmare, at least now I've woke up, and can logon again. My truck ('92 w/'02 TA-LS1) seems to be running pretty well, but a bit...

I have a newly installed 2004 LQ4 installed in my truck. The problem I just noticed while putting the heater back in is that the heater needs a...

ok. first off, i have used the search button pretty heavily, but i am still not entirely sure what this will require. the donor motor i came...

I have a 1987 pickup that is getting a LS1. The problem is I can't find a bellhousing that bolts up to my transmission. Can anyone point me in the...

Looking for the pinout info for the ODBII connector. I set it up like all the ODBII setups I've seen but get a failure to communicate error when...

I have searched for a while and still have questions. I have an 02 6.0 Lq4 going in a 84 chevy with a th400. The motor has the 4l80e flexplate. ...

Just wondering if anyone knows the part number for the accessory bracket for a 4.8 . Found one on ebay P/N 12554030 for anyone that would want to...

a buddy is installing the harness for me and called with a question..this is a nelson harness for a 2000 LS1, auto. he says on one of the relays...

350Z LS1 Mock up - V8 RX-7 Forum

Hello all, new to the board here. Recently, my L31 took a dump on me on the interstate and instead of fixing it up, I want to upgrade....... and...

Slowly working on my 5.3 conversion I wanted to know what would be the best wiring harness to use because I'm looking for one that I can use my stock...

hey guys we are going to do a 1986 chevy with a 6.0 conversion and wanted to know if their were some difference in the chassis and all that or is it...

I have a 4l80 that came out of a 98 chevy trk with a diesel and has been converted to full manual/vacuum modulated. Will it fit a Gen 3 6.0 liter...

does anyone know if a 1998 camaro ss t-56 six speed will bolt up to a 2002 5.3 vortec w/o a different bellhousing, i had heard that 2000-2002 would...