Forum: LSX Truck Conversions

Im starting to modify my 04 5.3l harness for my swap in my 67. I have the pinouts. Theres lots of wires i know what they do and a few i have no clue...

I just got my 6.0 lq4 in and running. Everything seems to be working fine. The only problem I am having is getting the oil pressure sensor and the...

Anybody takin the lq9 truck manifold and replaced with ls6 intake manifold? I have a chance to get a ported throttle body and Ls6 intake manifold is...

I am looking to purchase the LS1 engine to swap in my 1994 Z71 and see both iron and alum blocks. Is there any major differences other than price ?...

when putting a LS in a c10 what oil pan do you use, car or truck? im putting my 5.3 in my 59 apache which is clipped with a mid 80s frame so i...

how much fuel pressure can a pressure regulator handle on a 02 5.3 return style. is 125psi too much for it?

Hi all, i swap a 2003 ,6.0,LQ4 with a Th 700R4 behind in my Jeep CJ-7, it is a Vehicle Speed Sensor necessary to run the Engine ? Thanks in...

On a GM truck...Can someone please explain to me how the fuel tank gets pressurized, causing the quick rush of air release, when you remove the gas...

I have been throwing some ideas in my head about a build that may or may not take place. I saw an lq9 iron block for under 800 brand spankin new on...

Horrible video, but it shows my time. 15psi and 15* of timing I foot braked this launch. (no tbrake,2 step or nitrous) launched easy cause it...

Does anyone know the size of the hoses and fittings needed to connect a LS truck compressor to the rest of the system on an OBS truck? I planned on...

I'm having a hard time getting some specs on the 5 speed flywheel that came on the 6.0L. Could someone get me info on that or compare it to say the...

I'm helping a friend who blew the 5.0 in his 98 1500 4x4. I found a 6.0 LQ4 complete with ECU and uncut harness from a 2002 1500. Also a bunch of...

How hard would it be to swap the 4.3 out of my 2003 Silverado for a 4.8 or 5.3 v8 engine. I plan on finding an engine out of the same year model...

Ok I'm trying to get info on putting an LSX(with transmission) in my '93 S10 but all I can find is LSX's in the newer models('94 n Up). Has anybody...

anyone know if the LPP y-pipe works with pacesetter longtubes...i dont see why it wouldnt..just wondering if maybe there a lil different or not!

Im about to swap a 5.7 out of an f-body into an 82 C-20 truck. The motor will be carb'd so how will I need to do the fuel system and what motor...

Ok, I have a 94 truck which was originally a 4.3L NV3500 5spd truck and after V8 swap the NV3500 became too much of a problem and 6spds were too...

First off im in the middle of twin turbo's and just looking for some feedback im an a newb at fabricating i paint helicopters for a living and...

hey. I was wondering if someone knows if my old 94 transfer case will bolt up to my new 4l60e (2000+)?