i was out driving and i noticed my check engine light was on. i put down that i was removing the egr on the nelson tune. am i supposed to do something special with the egr wires or do you think they forgot to remove the egr from the computer.
i was out driving and i noticed my check engine light was on. i put down that i was removing the egr on the nelson tune. am i supposed to do something special with the egr wires or do you think they forgot to remove the egr from the computer.
1999 Chevrolet Silverado 5.3 ecsb auto, corsa, Edelbrock shorties, K&N intake, Nelson tune, egr is gone, 160 thermo, eaton lsd, motive 3.73s, tci 3000 ,beefed up 4l60e.
Probably forgot to remove the EGR from the computer, how in the world did you get the EGR hose bolt to budge from the manifold?
Chris
2009 Silverado, HPTuners, all stock.
P0405
DTC Definition:
EGR Flow Sensor A Circuit Low Input
03 SIlverado LS SCLB 4.8 w/ 3.42 rear, K&N FIPK, mild catbak duals, vette servo and a few other things added.
http://img.photobucket.com/albums/v2...hughes/600.jpg
ive got headers so i had to break the bolts loose before. they actually came loose easily.
1999 Chevrolet Silverado 5.3 ecsb auto, corsa, Edelbrock shorties, K&N intake, Nelson tune, egr is gone, 160 thermo, eaton lsd, motive 3.73s, tci 3000 ,beefed up 4l60e.
scroach20, i just noticed we had almost an identical setup, I am actually thinking about Edelbrock shorties too. lol
Did you have to put anything on the bolts to break them loose?
Chris
2009 Silverado, HPTuners, all stock.
the bolts came loose originally when soaked with pb blaster. just keep blasting and let it sit for awhile. the Edelbrocks do turn black after a couple of years but its not like rust. i never cleaned them though so i dont know if thats the reason.
1999 Chevrolet Silverado 5.3 ecsb auto, corsa, Edelbrock shorties, K&N intake, Nelson tune, egr is gone, 160 thermo, eaton lsd, motive 3.73s, tci 3000 ,beefed up 4l60e.
Hey, sorry for the mistake, I must have forgotten to turn all the codes off. Your retune will arrive this week.Originally posted by sroach20@May 1 2005, 05:06 PM
i was out driving and i noticed my check engine light was on. i put down that i was removing the egr on the nelson tune. am i supposed to do something special with the egr wires or do you think they forgot to remove the egr from the computer.
thanks,
allen
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Well I'll be damned,Steve Roach!You finally got a good tune eh!Not that hypertech BS!By the way this is Boofer,thats right man!When are ya gonna go tot he track with us man?
im still waiting on my tranny to be done. then its going in with the stall. after it is broken in i will see what i can do.
1999 Chevrolet Silverado 5.3 ecsb auto, corsa, Edelbrock shorties, K&N intake, Nelson tune, egr is gone, 160 thermo, eaton lsd, motive 3.73s, tci 3000 ,beefed up 4l60e.
would p0405 mess with my timing or anything. ive had to drive it for the past week but i dont have to drive it for the next week. just want to make sure it doesnt screw up anything.
1999 Chevrolet Silverado 5.3 ecsb auto, corsa, Edelbrock shorties, K&N intake, Nelson tune, egr is gone, 160 thermo, eaton lsd, motive 3.73s, tci 3000 ,beefed up 4l60e.
Posting Permissions
Reply With Quote
