+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25

Thread: Launch?

  1. #1
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,024

    Launch?

    Well i finally got my truck stalled and more or less finished im waiting on my retune but other than that truck runs great. The only thing i was wondering was when i take off from a dig should i stall it up and if so how much? my 4x4 isnt working at the moment hopefully n the next week or so i can get the TC-module out of sleep mode and i can just open up some 4x4 launches but until then what can i do? im prob going to be running a bolted duramax soon and if i can get infrount off the line i think i can hold him off. thanks for the help guys...
    Built 2 Run! 6XX HP/ 6XX TQ

  2. #2
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    7,112
    Umm common sense says stall it up as high as you can while keeping traction.
    2006 Silverado
    Little Black Bitch

  3. #3
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,024
    well even at 1000 i loose a good amount of traction. but if i stall it to 2000 it smokes the tires but seems to get to 60 alot quicker? just asking
    Built 2 Run! 6XX HP/ 6XX TQ

  4. #4
    Join Date
    Sep 2008
    Location
    Arizona/Utah
    Posts
    3,955
    Are you getting wheel hop or are the tires just worn.
    ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06

    waiting to go in... 3.90s, 214/220cam

  5. #5
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,024
    i think alittle of both, im going to try and get those clamps soon.... and then i need to rotate the tires. i prob have 40% on the rears and 55-60% on the frount.
    Built 2 Run! 6XX HP/ 6XX TQ

  6. #6
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,024
    well i got the wheel clamps on, seem to help alittle. i still spin them but its not as bad and it feels like a smoother take off
    Built 2 Run! 6XX HP/ 6XX TQ

  7. #7
    Join Date
    Sep 2008
    Location
    Arizona/Utah
    Posts
    3,955
    Nice must have eliminated some axle wrap.
    ECSB 2kSierra 2wd 4.8L-K&N-HPtuners-Calspeed LT's-Magnaflow-Tahoe20's-HankookRH06

    waiting to go in... 3.90s, 214/220cam

  8. #8
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,024
    ya i think it helped some. plus the bottom springs wernt in line with the rest it brought that back
    Built 2 Run! 6XX HP/ 6XX TQ

  9. #9
    Join Date
    Aug 2008
    Location
    mansfield texas
    Posts
    3,520
    I say do one of two after you call the company you purchased from.and ask if they have tested flash launching over stalling it. That could help. I know with my saab i could brake stall to 3500 and cut 1.8s but flash stalling just enough to get the slack out the drivetrain i cut 1.7s all day.
    Last edited by Crazy Blu; 09-15-2012 at 09:31 PM.

  10. #10
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,024
    ya ill have to call chris on monday. i love the stall just really need traction now
    Built 2 Run! 6XX HP/ 6XX TQ

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts