+ Reply to Thread
Results 1 to 10 of 10

Thread: Hey Yall!

  1. #1
    Join Date
    Oct 2006
    Posts
    52
    Hey ya'll. im 18, live in a small town in Missouri. i drive a exstensivly modded (int. ext. perf.) '89 Chevy reg cab stepside. I also own a gen III 6.0 lq4

    herien lies my problem- i have a built 700r4. what all do i need to do to mate my '01 6.0 to my 700r4 and keep the stock (reprogrammed of course) pcm and harness?

  2. #2
    Join Date
    Jun 2005
    Location
    Round Rock
    Posts
    1,517


    Someone will be along soon to answer that one, GoodLuck!!!
    08 HHR SS
    Black on Black 5 spd with no options


    Pics of Christine, the '05 VHO My Car Domain Site

  3. #3
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Welcome. You'll need a PCM tune from a stick shift truck most likely. You need to know which year 6.0L engine you have because the earlier models have a longer crankshaft at the transmission end, which will work in your favor when using the 700r4, otherwise you'll need a crank spacer.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  4. #4
    Join Date
    May 2006
    Location
    Waco TX
    Posts
    3,113
    Welcome to the site.
    DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31

    2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts


  5. #5
    Join Date
    Sep 2006
    Location
    Donna TX
    Posts
    62
    <div class='quotetop'>QUOTE(&#39;89ChevyMadneSS &#064; Oct 5 2006, 11&#58;10 PM) [snapback]68101[/snapback]</div>
    Hey ya&#39;ll. im 18, live in a small town in Missouri. i drive a exstensivly modded (int. ext. perf.) &#39;89 Chevy reg cab stepside. I also own a gen III 6.0 lq4

    herien lies my problem- i have a built 700r4. what all do i need to do to mate my &#39;01 6.0 to my 700r4 and keep the stock (reprogrammed of course) pcm and harness?
    [/b]
    http://i107.photobucket.com/albums/m...smoke118-1.jpg
    2001 GMC Z71 with 4.3L V6 flowmaster mufflers and intake spacer with a K&N cold air intake and a super coil along with under drive pullys and mudd terrian tires

  6. #6
    Join Date
    Mar 2006
    Location
    Mesquite
    Posts
    8,176
    <div class='quotetop'>QUOTE(&#39;89ChevyMadneSS &#064; Oct 5 2006, 11&#58;10 PM) [snapback]68101[/snapback]</div>
    Hey ya&#39;ll. im 18, live in a small town in Missouri. i drive a exstensivly modded (int. ext. perf.) &#39;89 Chevy reg cab stepside. I also own a gen III 6.0 lq4

    herien lies my problem- i have a built 700r4. what all do i need to do to mate my &#39;01 6.0 to my 700r4 and keep the stock (reprogrammed of course) pcm and harness?
    [/b]
    Pictures required from all newbies&#33;

    Welcome aboard and show us what ya got&#33;

  7. #7
    Join Date
    Sep 2006
    Location
    Coon Rapids, MN
    Posts
    1,219
    welcome to the site and we need to see some pics sounds like you have a sweet truck looking forward to seeing your ride soon

    04 Grand Prix GTP
    03 Z71 wanting a Turbo ,Stall, and Tune BAD
    THE SURGEON GENERAL SAYS NOTHING ABOUT SMOKIN A FORD

  8. #8
    Join Date
    Jan 2006
    Location
    Las Vegas, Nevada
    Posts
    328
    Welcome.

    1965 C-10 shortbed stepside, 2003 5.3/4L60E conversion. Power steering, tilt wheel, power front disc brakes, 3.73 one wheel peel, 2.5/4 inch drop, relocated fuel tank and battery, 2002 Silverado buckets and console. Swap Pics
    1968 Camaro 95LT1/4L60E lots o' mods Web Page
    1961 Corvette project.......... C-4 suspension and brakes, 02 LS1/T-56 awaiting installation Pics

  9. #9
    Join Date
    Oct 2006
    Posts
    52
    thank you thank you.

    as far as the year, the block is actually an &#39;03 but it has an &#39;01 intake so i dont have to jack with fly by wire.

    as far as pics go if someone could advise me on how to post pics i have a limited few i could post now and i can take more shortly. for now i guess a list of mods and your imagination will have to do&#33;

    SHOW:
    -interior- Jensen VM9511 indash do-everythng dvd player, Tahoe overhead console wrapped to match headliner, SS454(where i saw em anway) pullout cupholder, little chrome here chrome there dress up pieces on my instrument cluster and such
    -exterior- painted &#39;02 chevy black with purpl&#39;ishish ghost flames, lowered 4-6, shaved tailgate, custom flamed tails (painted and cleared to smooth), rollpan, custom one-off stainless steppads, 17" eagle alloys (torq thrust/cragar style)

    GO: K-Code TBI , hyperjunk chip, thrpttle body spacer, CAI (sorta) free mod, Flowmaster cat-back, built 700r4, TERRIFIC ONE LEGGED WONDER REAR END&#33;&#33;&#33;&#33; makes me soooo happy&#33;&#33;&#33;&#33;

    THE BAD: scratched up paint, 1 bad cab corner i f&#39;ed up my rollpan and bed corner, maroon interior, k-code and non posi rear end. but hopefully i will change all the bad shortly&#33;

  10. #10
    DBYRD Guest
    <div class='quotetop'>QUOTE(&#39;89ChevyMadneSS &#064; Oct 7 2006, 01&#58;28 AM) [snapback]68243[/snapback]</div>
    thank you thank you.

    as far as the year, the block is actually an &#39;03 but it has an &#39;01 intake so i dont have to jack with fly by wire.

    as far as pics go if someone could advise me on how to post pics i have a limited few i could post now and i can take more shortly. for now i guess a list of mods and your imagination will have to do&#33;

    SHOW:
    -interior- Jensen VM9511 indash do-everythng dvd player, Tahoe overhead console wrapped to match headliner, SS454(where i saw em anway) pullout cupholder, little chrome here chrome there dress up pieces on my instrument cluster and such
    -exterior- painted &#39;02 chevy black with purpl&#39;ishish ghost flames, lowered 4-6, shaved tailgate, custom flamed tails (painted and cleared to smooth), rollpan, custom one-off stainless steppads, 17" eagle alloys (torq thrust/cragar style)

    GO: K-Code TBI , hyperjunk chip, thrpttle body spacer, CAI (sorta) free mod, Flowmaster cat-back, built 700r4, TERRIFIC ONE LEGGED WONDER REAR END&#33;&#33;&#33;&#33; makes me soooo happy&#33;&#33;&#33;&#33;

    THE BAD: scratched up paint, 1 bad cab corner i f&#39;ed up my rollpan and bed corner, maroon interior, k-code and non posi rear end. but hopefully i will change all the bad shortly&#33;
    [/b]
    open an acount on like photobucket.com and just copy and paste the IMG part under the pic(after u upload from ur computer) and it will appear in the thread. also may try like Ifranview to resize the pics if u dont have software capable of resizing it already. the reason is of coarse if u have like a 5-7 megapixel camera ur pics r gonna be humongous&#33; any other questions holler&#33;

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts