+ Reply to Thread
Results 1 to 4 of 4

Thread: 5.3 required tools for removal

  1. #1
    Join Date
    Apr 2019
    Posts
    1

    5.3 required tools for removal

    I've scoured the site for several hours hoping to find an answer, but i haven't found any. Does anyone happen to know exactly what tools, aside from sockets and screwdrivers, ill need to remove a 5.3 out of an early 00s silverado? Im going to a yard this weekend to pull a motor for my swap, but i want to make sure im prepared tool wise to pull it.

  2. #2
    Join Date
    Nov 2009
    Location
    SAN ANTONE
    Posts
    781
    you will need basic socket set, some pliers and some wire cutters. I would also take a long prybar also.
    06 rcsb, 6two, 231/235, 4.11, pacesetter, 80e, 14 bolt, Nelson tuned
    2011 rcsb 6two swap in the works with 6l90 and boost
    FARMTRUC CAN GARGLE PEANUT BUTTER

  3. #3
    Join Date
    Mar 2016
    Location
    BC Canada
    Posts
    86
    Fuel line disconnect tools unless you just cut the hose. Bring lots of extensions to get the belhousing bolts

  4. #4
    Join Date
    Mar 2016
    Location
    BC Canada
    Posts
    86
    Oh and bring a hack saw incase you can't get the 15mm exhaust manifold bolts off. They are a sombitch

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts