+ Reply to Thread
Results 1 to 4 of 4

Thread: 2wd to awd coversion

  1. #1

    2wd to awd coversion

    I have a 02 Denali for donor awd 6.0 of course

    I want my 05 rcsb 4.3/5spd to be converted to awd 6.0 auto.

    Has anyone here done this.

    I already know it's better to just buy one but if I remember correctly a single cab never cam awd and that is what I'm wanting

  2. #2
    Join Date
    Nov 2009
    Location
    SAN ANTONE
    Posts
    781
    the only advice i can give you is just tear your truck down and start mocking up the parts, im sure there will be some drilling and welding involved but it shouldnt be too hard, they do make 4wd reg cabs so its gotta fit
    06 rcsb, 6two, 231/235, 4.11, pacesetter, 80e, 14 bolt, Nelson tuned
    2011 rcsb 6two swap in the works with 6l90 and boost
    FARMTRUC CAN GARGLE PEANUT BUTTER

  3. #3
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    that's funny how you got one or the other and you want the other, lol.

  4. #4
    Join Date
    Aug 2011
    Location
    New Port Beach, CA.
    Posts
    54
    there are going to be problems. make sure you pull the power plant out complete even the fuel lines your going to need them, they com off the frame in a different spot on a two wheel drive. also you my run into problems with the front splindals, shock and spring placement. the front end of an denali is torsion bar. your gonna need those and the cross ember under the trans. The lower control arms, sway bar, front lower crossover brackets for the dif. mounts off of a 4x4 of your year truck and wheel bearings that are splined. In short you need another 05 4x4 doner. That's going to be a project. the list goes on but it can be done.
    6.0 MAX Blown

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts