5.3 Junkyard Build. Need inputs before proceeding.

[92_obs]

Like it says im brand new to this.




Ive got an 02 5.3 from some guy off craigslist for $200. Block/Heads/Crank/Rods/Oilpan/NoSensors. I want to put it in my 92 Ext cab Silvy to take place of the 350. As of now my 350 isn't blowing up soon so I want to put the 5.3 on an engine stand and build it throughout the time. Ive done tons of research for the past 6 months before buying the engine. And I want opinions if the parts list I have will work as a DAILY and a weekend warrior.

(500-600)HP Goal


Intake: Truck intake

Throttle Body: Aftermarket 80mm TB

Injectors: 60lb siemens

Fuel Pump: Walbro 400

Heads: 706 heads

Valvesprings: LS6

Pistons: OEM cup dome pistons

Rods: OEM 143 connecting rods

Crank: OEM 5.3 crank

Harness/Comp/Etc: NOCLUENEEDHELP

Turbo/Bov/WG: On3 76mm, 50mmBOV, 44mmBOV

ARP main stud Kit/ ARP head bolt kit

LS9 Head Gaskets

Pushrods: 7.425 pushrods

Camshaft: LS6 camshaft

Lifters: OEM Lifters

Rockers: OEM 1.7 ratio Rockers

[Gemini]

Get yourself some ARP connecting rod bolts as well. As far as the PCM I'd recommend Nelson Performance. They know what they're doing and most importantly have good customer service.