+ Reply to Thread
Results 1 to 3 of 3

Thread: '93 C1500 5.3 Swap

  1. #1
    Join Date
    May 2015
    Location
    Southern Indiana
    Posts
    3

    '93 C1500 5.3 Swap

    hey guys, kinda new here. This is my project/ daily driver. Been driving this truck since i was 16 (im 22) done everything from rebuild a Corvette 350 for it, then built a 5.3/LS1 for it last year, new Jasper trans, 4.10 rear with positrac, cowl hood, blacked out grille, Kicker subs also.

    Current Motor:
    5.3 bored to LS1 spec (stock crank, rods, flat top pistons)
    Comp Cam
    Stock heads with Comp components (soon to be Dart LS1 heads with big valves)
    Stock truck intake for torque, smoothed out to look nice
    Holley fuel system and Terminator EFI computer system (touchscreen tuner in cab)
    MSD Street Fire coils
    Summit 85mm throttle body

    026 (5).jpgIMG_5145.jpgIMG_4969.jpgIMG_5360.jpgIMG_5334.jpg
    Last edited by 70CamaroRS; 02-15-2016 at 11:07 PM.

  2. #2
    Nice ride! Good job on the intake, Looks clean being smoothed out. What coil relocation brackets did you use?
    2000 RCSB
    LQ9
    Torquer V2
    T56 Magnum
    305 drag radials
    3/4 lowering kit

  3. #3
    Join Date
    May 2015
    Location
    Southern Indiana
    Posts
    3
    I used the Proform LS1 coil relocation. they work pretty well, no real complaints

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts