I'm new to the 6.0. New to gm motors entirely but I was wondering what would be a cam Set up for the rectangular port ls3 heads,not looking to go to crazy don't really wanna spend money on a tune. Any suggestions would be greatly appreciated
I'm new to the 6.0. New to gm motors entirely but I was wondering what would be a cam Set up for the rectangular port ls3 heads,not looking to go to crazy don't really wanna spend money on a tune. Any suggestions would be greatly appreciated
Man there are so many variables when it comes to choosing a cam. That being said, regardless of which cam you choose I would absolutely pay the extra money to get it tuned right. For anyone else to help give you a cam recommendation you should post what mods you have done to the truck as well as your goals and what you plan to use it for.
2000 RCSB
LQ9
Torquer V2
T56 Magnum
305 drag radials
3/4 lowering kit
The trucks completely stock,except for a k&n cai. I don't plan on racing or hot rodding just looking for a little more power on a budget
Take a look at the Comp XR269HR on a 114LSA
Get some new valve springs, LS6 springs will work and are affordable. Also get some hardened pushrods.
And get that sucker tuned.
2000 RCSB
LQ9
Torquer V2
T56 Magnum
305 drag radials
3/4 lowering kit
A tune will always wake up a truck.
2015 Yukon SLT
2000 RCSB 6.0/4l80e
1967 Chevy II 5.3 w/ 76mm snail