+ Reply to Thread
Results 1 to 3 of 3

Thread: Dodge Durango LS swap. I am looking for information about drivetrain options.

  1. #1
    Join Date
    Aug 2012
    Location
    Tampa, FL
    Posts
    18

    Dodge Durango LS swap. I am looking for information about drivetrain options.

    Hi.

    I have a 2000 Dodge Durango that I want to put an ls engine in. I want to use a Gen IV, 6.0 engine, but I am not finding enough good information for the transmission and transfer case.

    Assuming I use a complete drivetrain, what would be the most common transmission and transfer case attached to a Gen IV 6.0 engine in a Silverado/Sierra?

    Also, would trailblazers, H2 or H3, or other mid-size SUV that would have the same, or a different transmission and transfer case?

    Any info would be appreciated.

  2. #2
    The most common transmission you'll find behind a 4th gen 6.0 truck will be a 6l90, RPO code MYD which you can find in the glove box if you get a chance to look. There are a lot of different transfer cases used in these trucks also. Here's a good list: http://www.provenforce.com/transfer_...rado_2500.html.

    That being said you aren't limited to the trans or t cases that came behind the 4th gen engines.
    2000 RCSB
    LQ9
    Torquer V2
    T56 Magnum
    305 drag radials
    3/4 lowering kit

  3. #3
    Join Date
    Dec 2004
    Location
    San Antonio, TX Area
    Posts
    1,741
    Check out his thread, he might have some info you need.
    http://www.ls1truck.com/forums/newbi...dodge-ram.html
    "ALisSa1 Silverado"
    1990 Chevrolet RCSB 2002 Chevrolet Camaro LS1/4L60E
    Scrimpin Ain't Easy
    ( . Y . )


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts