Closed Thread
Results 1 to 8 of 8

Thread: FS/FT: 2004 Crew Cab, SLT very clean

  1. #1

    FS/FT: 2004 Crew Cab, SLT very clean

    THIS IS CROSSPOSTED!!!!!!!

    I've gotten bored with my truck, and really want to get back into an F-body or possibly a GTO.

    I want to trade for a very clean car, no projects or junk, prefer auto...I was neglected as a child and never learned to drive well with manual, but for the right car I can learn and trade. I am in the Frisco area.

    On to the good stuff

    -2004 Sierra Crew Cab
    -~85k (I'll get exact numbers today)
    -SLT package, interior is in great condition
    -There are no major dents or dings in the body **(updated July 22, truck was hit while I was having it tubbed up front, currently working on getting it all fixed and painted)**.
    -Denali headlights
    -Escalade door handles (inside and out)
    -factory 6-disc, keeping my DD
    -Red SVE cluster overlay
    -White LEDs in cluster
    -roll-n-lock bed cover
    -GMC 20's with nearly brand new Falken Ziex STZ-05 (couple months old, less than 2k miles, have receipts)
    -Mcgaughy 16" drop spindles, modded for better turning radius
    -Bell Tech flip kit
    -MCG bolt in notch (welded too) with MCG helper bag setup (gauge mounted in cab)
    -Cal Speed SS headers
    -Vortec Max 3-piece engine cover
    -Vette servo
    -Black Bear 93 tune
    -bed liner
    -new battery with receipt
    -3 piece engine cover
    -all new ball joints, tie rod ends, and upper control arms. I have all receipts
    -Monroe Sensatrac shocks with receipts (REAR ONLY)
    -Hooker Aerochamber muffler dumped
    -plugs are a yearish old
    -new MSD wires with receipts
    -viper alarm with remote start
    -airraid MIT with dry filter
    -ridetech coilovers

    Rear end fluid was changed last year. I run amsoil in the engine. I bought the truck 2 years ago with 67k. I recently had the mirror caps and emblem professionally colormatched with correct paint code, no spray paint here. The truck is in really good condition, it is my pride and joy.

    I will add and correct things as I notice them. I will NOT lie about anything, and will disclose any issue I find with the truck to potential buyers. I am very active on CustomGM.com, and you are welcome to visit there and do any research of my truck that you wish.






    the candy is coming off of the tails, I have oem tails and headlights too...I have all my oem parts as a matter of fact




    spindles were modded for better turning radius






    The day it came out of the body shop


    ridetech coilovers

    as it sits today





    I just ordered a set of heims and adapters to run on the spindle without drilling it out. Also have brand new DDM 5k 35w hids. Just had it aligned, it has a new front bumper, headlight, pass. mirror, OEM fender.
    $16k

  2. #2
    I also have a huge unopened roll of grey suede, a Dorman window regulator Dorman 741-644 Front Driver Side Replacement Power Window Regulator with Motor for Select Cadillac/Chevrolet/GMC Models : Amazon.com : Automotive (just in case), Dorman ISS Dorman 425-176 Intermediate Steering Shaft : Amazon.com : Automotive and the bearing, spare grille in case someone wants to do the "bgray mod". Spare set of UCAs, spare TREs, spare shocks, all factory suspension that was taken off for drop and coilovers MINUS the coil springs. I traded the OEM set for a 2 piece driveshaft that is also included. The lowering springs sold last week. OEM Sierra headlights, factory air tube, extra set of tail lights, original interior door handles, original cluster overlay.

    I will list more as I find them.

    The whole lot goes if I get what I want out of it, low ball offers will not come with all the extras.



    also have a pioneer double din, all stinger wiring/rcas, sundown amp and two boxes (one for a single 10", one for two 10")

  3. #3
    Join Date
    May 2008
    Location
    wichita falls, tx
    Posts
    613
    Quote Originally Posted by Jared View Post
    I just ordered a set of heims and adapters to run on the spindle without drilling it out.
    Where did you order the adapters? Good looking truck by BTW hop e you have good luck with selling it.

    Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
    EPS cam 23x/23x 600/603 112lsa
    KP 6 link bagged with Accuair E-Level
    http://www.nitrousexpress.com/

  4. #4
    Join Date
    Aug 2008
    Location
    mansfield texas
    Posts
    3,512
    Bump for clean ass ride

  5. #5
    Thanks guys.

    The adapters came with the heims. But a place called speedway sells them separately for like $10. I'll link you when I get off and to a computer.

  6. #6
    here's the link, now come bag my truck so I can keep it

    http://www.speedwaymotors.com/Adjust...Heim,3333.html

  7. #7
    price drop $15k

  8. #8
    please close, truck is being bagged!

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts