+ Reply to Thread
Results 1 to 7 of 7

Thread: Spark plugs

  1. #1
    Join Date
    Jun 2012
    Location
    Carrizo Springs Tx.
    Posts
    53

    Spark plugs

    I had some oem spark plugs, they were fine then I bought some ngk tr55 part number 3951.. And gapped them to 40 and when stomp on it from a dead stop it's super sluggish. Then it's pulls after.

    But with oem plugs it would bark 35s just alittle.

    With tr55 at 40 gap it would not.

    Should I gap higher
    Mods: CAI,Magnaflow Exhaust, Calspeed LTs & ORY, Airaid TBS, Vette Servo, Nelson Performance Tune

    Future Mods: 4.56 gears , 212/218 cam, stall converter and 100-150 shot, Rebuilt tranny.

  2. #2
    Join Date
    Nov 2007
    Location
    THE MEAN STREETS OF OKLAHOMA
    Posts
    11,119
    why are you gapping them ?
    THEY CALL ME G.

    AZRAEL
    01 GMC REG CAB BUILDING
    06 SILVERADO SS 80E 3200 YANK LS3 TOP, DD
    2013 POLARIS RANGER CREW LE EPS

    The difference between winning and losing, is having a 2nd stage.
    Quote Originally Posted by A PATRIOT View Post
    "MOLON LABE"

  3. #3
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Factory gap is .060. Only need to close that up for n2o or boost.
    2006 Silverado
    Little Black Bitch

  4. #4
    Join Date
    Mar 2010
    Location
    San Antonio, Tx
    Posts
    355
    TR55 are pre gapped should be .060, leave it there!. The OEM Iridium plugs have .040 gap. Any non-iridium plug needs to be .060 unless different cylinder pressure
    than stock.
    2002 ECSB 2WD 5.3
    1995 Formula Firebird 383 LT1
    1984 Camaro 408 SBC

    Most sports require one ball, motocross requires two.

    Racing isn't a matter of life and death, it's much more important than that.

  5. #5
    Join Date
    Apr 2012
    Location
    LaVista Ne.
    Posts
    19
    What gap if different than stock cylinder pressure?

  6. #6
    X2 on not adjusting the gap.

  7. #7
    Join Date
    Nov 2009
    Location
    SAN ANTONE
    Posts
    781
    i would set the gap to .045-.050 with a tr55 plug
    06 rcsb, 6two, 231/235, 4.11, pacesetter, 80e, 14 bolt, Nelson tuned
    2011 rcsb 6two swap in the works with 6l90 and boost
    FARMTRUC CAN GARGLE PEANUT BUTTER

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts