+ Reply to Thread
Results 1 to 6 of 6

Thread: Moving Soon = Garage Cleanout. Turbo parts, stock NBS silverado stuff, Need Gone!

  1. #1
    Join Date
    Mar 2010
    Location
    Tuscaloosa, AL
    Posts
    256

    Moving Soon = Garage Cleanout. Turbo parts, stock NBS silverado stuff, Need Gone!

    I am moving in a few weeks and dont want to move all this stuff. Everything is OBO. For the big stuff Ill will basically give it away if you come get it or meet me close since shipping will be the majority of the cost. Combined items get discounts! All prices are without shipping, we will work something out. The stuff is listed in the same order as the pictures.

    1999 Silverado Factory Stuff
    Fuel lines - $40
    powersteering lines - $30
    evap lines and box - $40

    Husky floor mats, the good ones, PENDING

    Windshield washer res - $30
    powersteering pump - $30
    like-new coolant res - SOLD
    like-new Autometer boost gauge 2614 - SOLD

    Z71 skid plate and front guard thing - $20 each or $40 for both
    B&M cooler, can be used for oil or trans, good shape, like new - PENDING

    Textured fender flares - SOLD
    clutch fan shroud - $20

    kick panels, both sides - SOLD
    a-pillars - SOLD
    driver side floor trim - $20
    blower motor cover -$15
    adjustable seat bracket for a corbeu lg1 seat, may fit other aftermarket seats. fits in factory spot with factory hardware. $50

    cable cruise control module - $30
    stock brake pedal - $10
    4l60e tube and dipstick - SOLD
    ground battery connector, uncut - $15
    positive battery connector, cut after 2' - $15
    99-02 airbag, good shape - $25
    99-02 airbag, terrible shape - $10 (could be fun to use as a prank...)

    28" radiator - $40
    pcm holder - SOLD
    pcm cover - $10
    2004-5.3-4l60e stock pcm - $60

    stock regular cab short bed rear driveshaft - $50
    part of the front driveshaft without connectors - $10 (or free with the rear)

    air conditioning compressor (works fine) - SOLD
    ac compressor mount (2) - SOLD
    high pressure hose, painted and heat wraped - SOLD
    other hardline, painted - SOLD
    condensor (good shape) - SOLD
    vacuum booster - $15
    factory rear shackles - $20
    factory rear bump stops with brackets - $20

    RCSB blue carpet, very rare () - $40
    rcsb back wall insulation - $20
    2005 rcsb back wall carpet - $15
    2008 rcsb back wall carpet - $15

    Also have the factory blue cloth seats without the seat brackets, free if you come get them, will not ship these. Have the center jumpseat as well.

    Other Stock Stuff

    Bare L92 intake manifold (damaged in shipping, can be fixed) - $50
    L92 intake cover - SOLD
    L92 gaskets - $15 or free with intake

    Set of LQ4 pressed-pin (early style) rods and pistons. Needs rings and bearings probably. - $80

    Aftermarket Stuff
    Like-new Autometer boost gauge 2614 - SOLD
    ruff-stuff specialties ubolts and spring plate for 14bolt. 5/8" ubolts and 3/8" spring plate, very heavy duty - $40
    competition engineering shocks, short - $25 for both
    competition engineering shocks, long - $25 for both
    moog 1500 tie rods, about 3000 miles, work fine, have sleeves - $60 for both with sleeves

    Turbo Cold Side Stuff:
    RPS BOV - SOLD
    3" pipe with BOV mount and meth hole - SOLD
    3.5" pipe with 2 BOV mounts and meth holes - SOLD
    12x3" silicone thing - SOLD
    3x4" silicone reducer - SOLD
    180 degree 3" bend - $15
    3" high angle coupler - SOLD
    12x3" rolled end AL tube - SOLD
    3" 75 degree silicone thing - $10
    misc 3" rolled ends - free with something else
    135 degree 3" bend - $15
    3" silicone short section - $5
    3" t-bolt clamps (6) - SOLD
    4" like new air raid filter with bend and pipe - SOLD
    45 degree 4" silicone coupler - $10
    short 4" pipe, free with filter or both 45 degree bends

    Turbo Hot Stuff:
    Factory driver side truck manifold - $40
    KB crossover pipe and KB stainless 4" 2 piece dp - SOLD
    ebay T4 blanket - SOLD


    Stuff I originally forgot:
    Stock rocker arms with pedestals - $40
    Stock pushrods - $15
    Billet 1.5" 6x5.5 wheel spacers - PENDING

    Alright I think thats everything. Like I said I am moving and do not want to take this stuff with me, if it doesnt sale it gets donated to a local salvage yard or throw out. If you come pick it up you get a great discount! Dont be shy about making offers, if its half way decent I will probably take it.
























    Last edited by Atomic; 06-24-2013 at 02:15 PM.

  2. #2
    Join Date
    Mar 2010
    Location
    Paris, TX
    Posts
    511
    How much for all the A/C stuff and the cruise control module? Shipped to 75462
    99' Silverado RCSB Z71: 5.7L Iron LS1, 11.2:1, Custom EPS Cam, Ported 862's,Ported TB, E-Bay Cold Air, E-Bay Long Tubes, Dynomax X-Pipe Exhaust, Electric Fans, Innovative LC-1, Self Built 4L60E, Circle D Pro Single Disc, 4:10 ValueTrac


    http://www.ls1truck.com/forums/image.php?type=sigpic&userid=7887&dateline=1270435  715

  3. #3
    Join Date
    Mar 2010
    Location
    Tuscaloosa, AL
    Posts
    256
    PM sent

  4. #4
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020
    Dam, 3 weeks ago i would of bought a bunch.... gl with sale

  5. #5
    Join Date
    Mar 2010
    Location
    Tuscaloosa, AL
    Posts
    256
    List updated and price dropped on the turbo pipes!

  6. #6
    Join Date
    Mar 2010
    Location
    Tuscaloosa, AL
    Posts
    256
    List updated!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts