+ Reply to Thread
Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 11 to 20 of 33

Thread: Door speakers

  1. #11
    Join Date
    Mar 2010
    Location
    San Antonio, Tx
    Posts
    355
    Ive heard really good things about Digital Designs components. I have some crappy MDX's but they are better than stock.
    2002 ECSB 2WD 5.3
    1995 Formula Firebird 383 LT1
    1984 Camaro 408 SBC

    Most sports require one ball, motocross requires two.

    Racing isn't a matter of life and death, it's much more important than that.

  2. #12
    Join Date
    May 2008
    Location
    Crowder, OK
    Posts
    8,005
    Quote Originally Posted by screaminchicken View Post
    Ive heard really good things about Digital Designs components. I have some crappy MDX's but they are better than stock.
    You cannot go wrong with anything from digital designs. Very vert high quality stuff.

  3. #13
    Join Date
    Mar 2009
    Location
    Wichita Falls, TX
    Posts
    2,172
    I have never heard bad things about any of the brands mentioned. Be sure and get an amp with enough power to push said component system, your aftermarket deck just won't be enough (for best sound quality).
    2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
    2002 black Yukon SLT (the skinny sister)
    1969 green Pontiac GTO (Layla, AKA the black sheep)

    INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
    Sticky/broken gauges? I can help. PM me for details.

  4. #14
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020
    no to highjack the thread but i got the type S component set and they sound pretty good but i was jw whats a good amp for them im running them and clerion 6x9's in the back?
    Built 2 Run! 6XX HP/ 6XX TQ

  5. #15
    Join Date
    Mar 2009
    Location
    Wichita Falls, TX
    Posts
    2,172
    Just make sure your amp rms output matches the power handling of your speakers. Example. A pair of four speakers that can handle 75w rms each need a four channel amp that pushes 75w rms per channel.
    Brand is personal preference for the most part. Pay the most attention to the rms power. Sony xplod amps are labelled with their max wattage, rms on a 1000w Sony xplod amp is only about 200-300 watts. A Rockford Fosgate power 500.1 actually pushes 650-750 watts rms. In other words, don't fall for the gimmick, research and buy a good amp. I like Rockford punch and power amps because they are powerful, efficient, and leave a small footprint.
    2005 black Yukon XL SLT - traded in for me wife's new Fusion (GM sucks these days)
    2002 black Yukon SLT (the skinny sister)
    1969 green Pontiac GTO (Layla, AKA the black sheep)

    INSTALLS AND MORE.. http://www.ls1truck.com/forums/my-ga...-low-life.html
    Sticky/broken gauges? I can help. PM me for details.

  6. #16
    Join Date
    Oct 2011
    Posts
    605
    Just put a nice set of components in my G8, Polk's for $200, I really like them.

  7. #17
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020
    these are what i got: SPR-17S ALPINE 6.5" TYPE R COMPONENT SPEAKERS SPR17S

    Type-R 6-1/2" 2-way Component System
    Power Handling:
    Peak: 660 watts per set / 330 watts each side
    RMS: 220 watts per set / 110 watts each side
    Impedance: 4 ohms
    Hybrid layered-pulp woofer with rubber surround
    1" Textile ring-dome tweeter
    External crossovers — 12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points
    Frequency response: 65 Hz - 27 kHz
    Sensitivity: 87 dB
    Top-mount depth: 2-5/16"
    Built 2 Run! 6XX HP/ 6XX TQ

  8. #18
    Join Date
    Oct 2011
    Location
    San Antonio TX
    Posts
    1,150
    Quote Originally Posted by darnie1987 View Post
    these are what i got: SPR-17S ALPINE 6.5" TYPE R COMPONENT SPEAKERS SPR17S

    Type-R 6-1/2" 2-way Component System
    Power Handling:
    Peak: 660 watts per set / 330 watts each side
    RMS: 220 watts per set / 110 watts each side
    Impedance: 4 ohms
    Hybrid layered-pulp woofer with rubber surround
    1" Textile ring-dome tweeter
    External crossovers — 12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points
    Frequency response: 65 Hz - 27 kHz
    Sensitivity: 87 dB
    Top-mount depth: 2-5/16"
    These are the same ones i got n i love em. Got a alpine 55 x 4 Watt rms running them and they will make ur ears bleed at half volume.


    4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
    Best ET 11.54@114 w 1.52 60ft
    Raceweight 4905 lbs.

  9. #19
    Join Date
    Dec 2009
    Location
    DIrty south AZ
    Posts
    1,020
    nice... well now i know what to get
    Built 2 Run! 6XX HP/ 6XX TQ

  10. #20
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    Not to hijack Ray, but what do people usually go with to replace with stock speakers with something other than components? In case they dont want to use an amp to power the speakers.
    1951 3100
    1984 C10

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts