Anybody here running a 315/35/20 on a 4/6 drop?
I'm thinking if I widen a stock 8.5 SS wheel to 10 inches, increasing the backspacing, where the extra tire would be inside of the fender, it should not rub. Thoughts?
I know a 275/45 20 will not rub and it's slightly taller than the 315/35.
I have 315/35 20 drag radials on my sss wheels with a 3/4 and don't have issues
Stock 8.5 width or did you have them widened?Originally Posted by Quik
Current project.
1957 Belair
SOLD!
http://www.ls1truck.com/forums/my-ga...rkwhite61.html
1999 Silverado RCSB
2004 LS6
4/6 drop
frame off rebuild
Stock width
i have the 315-35-20s on some 20x12s in the rear. but i have plenty of clearance with the tub. id bet with 10s you would be ok.
single digit street truck
for build info
http://www.ls1truck.com/forums/my-ga...cs-garage.html
The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......
probably gunna be close if they are on a 10 or 11" wheel and tucking... If they are on a 8 they aren't quite as wide..
thanks guys.
Quik.. damn nice truck. Post up some full body shots. I'd like to see the whole enchilada! Inspiring.
Current project.
1957 Belair
SOLD!
http://www.ls1truck.com/forums/my-ga...rkwhite61.html
1999 Silverado RCSB
2004 LS6
4/6 drop
frame off rebuild
Posting Permissions
Reply With Quote
