Hey guys.
Kind of a troubleshooting post, but does involve dod delete and an eaton (tvs) charger.
Gotta 2011 truck, 5.3L, 6speed auto.
Removed the heads and got rid of those DoD lifters. Install went fine.
Installed a charger.
Truck originally was calibrated for DoD.
On all the other years 2010 and earlier, we simply physically remove the DoD parts and turn off the codes, everything always works great!
On this particular truck, did the same thing and now the truck is stuck in DoD mode for some reason.
Tried:
-switching off DoD in pcm
-turned off codes
-used another 2011/2010 4.8L ecm code with no DoD
-used another ecm with same code, just to make sure
-used a 2008 ecm, 6L with no DoD
The engine is still stuck in DoD mode. cylinders 1,4,6,7 are misfiring.
any input is appreciated,
allen