+ Reply to Thread
Results 1 to 3 of 3

Thread: 4L60e built!

  1. #1
    Join Date
    Dec 2008
    Location
    La Porte TX
    Posts
    321

    4L60e built!

    I am selling my trans which I have had rebuilt by Rick at Clear Lake Trans. Spent about a $1000 on hard parts alone for this trans. I wanted it to not break again after the troubles I had from a previous builder. It has the race pack clutches, Upgraded B sun shell, 5 planetaries, corvette servos, shift kit and more. I have less than 500 miles since rebuild. I didnt keep track of mileage, but it may be more like 300 miles. I have gone to the track 2 times and made 3 passes each on motor, no spray. I do not have the pressures turned up and if needed, rick said it would adjust it to my liking and I am sure he would do the same for the next owner as well. Only Dexron 6 has been used to insure a good fluid, not just an oriellys brand. I am not really wanting to sell but priorities come first so thats the reason for the sale. I will take $1300 for the trans and the Dacco 2800-3000stall. I prefer text vs messaging on here. 2 8 1 5 0 8 4 5 3 5
    5.3, small cam, 918 springs, 7.4 rods, walboro pump, Full built 4l60, 2800-3000 stall, TB spacer, long tubes, cat delete, single 3" exhaust with Aero bullit muffler. Flaco tuned.

  2. #2
    Join Date
    Dec 2008
    Location
    La Porte TX
    Posts
    321
    Ttt
    5.3, small cam, 918 springs, 7.4 rods, walboro pump, Full built 4l60, 2800-3000 stall, TB spacer, long tubes, cat delete, single 3" exhaust with Aero bullit muffler. Flaco tuned.

  3. #3
    Join Date
    Dec 2008
    Location
    La Porte TX
    Posts
    321
    Sold
    5.3, small cam, 918 springs, 7.4 rods, walboro pump, Full built 4l60, 2800-3000 stall, TB spacer, long tubes, cat delete, single 3" exhaust with Aero bullit muffler. Flaco tuned.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts