install instructions.. http://www.urbanindustries.com/files/fastback2.pdf
install instructions.. http://www.urbanindustries.com/files/fastback2.pdf
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Thanks for the Urban install instructions. The engine compartment and valve covers look great. I have never seen another set like those.
covers are installed now13700112_10206635663194535_3197720109923654766_n.jpg
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Been a while.. where do I start? well, I got a new intake and TB (might have had that before)..but that presented a cooling problem.. putting fans directly on the radiator didn't work so well, so I got a sheet metal shroud off ebay, put some 16 inch SPAL fans on it, and got a couple pieces made at work to secure it in place. Then at some point I upgraded the P1 to a D1.. updated the tune.. started blowing off the couplers LOL.. up to a true 12 PSI now. ill just upload a bunch of pics here.
also got some Wegner motorsports valve covers custom made. they are now part of their parts line up!
Last edited by MidwestSS; 01-25-2019 at 09:23 PM.
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Last edited by MidwestSS; 01-25-2019 at 09:22 PM.
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!