Need info. Has this ever happend or have you heard of this happening.

[Paulster2]

If i remember correctly the middle is the largest and then 2&4 are a bit smaller then 1&5 are the smallest

I'm not trying to ding on you here, but wanted you to think about what you are trying to say ... if the 1 & 5 were smaller, you wouldn't be able to get #2, #3, or #4 past #1. If they are different sizes, it would have to be #1 being the largest and going smaller from there back, with #5 being the smallest. I hope this makes sense.

[danger_ranger83]

Outside diameter....

[Frenchy]

lawlz

[Show&Go]

Either way aside from oil pump the bottom end is assembled.... Heads will hopefully be on tomar as well as the valley cover knock sensors etc.