just want to know how common is it for are intake manifold gaskets to go out on out trucks. it was throwin po171 and po175 also had a low voltage for the maf. replaced the maf for the 2nd time in a yr. now its doing the same thing. frist start up it revs ti 1700 then down to 300-400 and wants to stall. this is only on cold start up only
Last edited by 02CHEV; 03-02-2011 at 09:32 AM.
04 Grand Prix GTP
03 Z71 wanting a Turbo ,Stall, and Tune BAD
THE SURGEON GENERAL SAYS NOTHING ABOUT SMOKIN A FORD
Take a propane torch (don't light it) and spray it around the intake with the engine running, any changes, you know its the gaskets.
2006 SilveradoLittle Black Bitch
good advice devin
Last edited by sierraman; 03-02-2011 at 04:45 PM.
MY GARAGE - http://www.ls1truck.com/forums/my-ga...ns-garage.html
2004 GMC Sierra - RCSB
This may help with your MAF problem: http://performancetrucks.net/forums/...d.php?t=415733
And yes, your intake gaskets are junk. Replace them with the newer "teal" ones.
http://www.fullsizechevy.com/forum/g...d-weather.html
Big slow mud truck with a TUNE!!!!!!
thanks for the advice. i just got home from work. i have been loooking into things threw work as well
04 Grand Prix GTP
03 Z71 wanting a Turbo ,Stall, and Tune BAD
THE SURGEON GENERAL SAYS NOTHING ABOUT SMOKIN A FORD
Posting Permissions
Reply With Quote
