Reply With Quote
Who is your builder for the TH400? I can recommend a great one if you're interested.
Looking forward to the project bud!
Guys, I am very slowly gathering parts for a new project; a 370 in a '94 Nissan Hardbody.
The truck is pretty rough, but it was almost free.
The plan is this:
370 built by HKE, ported 799 heads, the usual cam, springs, etc..
Victor Jr., TH400, 4000 stall, narrow rear frame rails and tub enough to fit 325/50-15's, ladder bars with coil overs, factory Nissan wheels widened to 15x10 for the rear, and spray 200.
The truck is very light; around 2600. It should be well below 3k when done.
I'd like to see 10.0s
This will be a very lOOOOOOOOOOOOOOOOOOOONG project, but it does give me something to do.
'92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
http://videos.streetfire.net/video/d...d700c6401f.htm
working on '94 Nissan Hardbody with LS motor & th-400.
v-8 swap in my '04 Silverado also in the works.
Who is your builder for the TH400? I can recommend a great one if you're interested.
Looking forward to the project bud!
get some pics up when the build starts
5.3 224/224xe .566 .566 114, Comp 918 and 7.4, 3200 stall, 8.1 injectors, LT's ORY and no cats, Nelson Tune
wow that is going to be pretty sweet!
NP CHARGED
Right now I'm stripping out the interior and cleaning it up. I am going to wait until I have pics worth showing before I post some.
Last edited by Defunct SO; 02-14-2010 at 11:50 AM.
'92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
http://videos.streetfire.net/video/d...d700c6401f.htm
working on '94 Nissan Hardbody with LS motor & th-400.
v-8 swap in my '04 Silverado also in the works.
I had a 97 hardbody just like that. I miss that truck, wish I hadnt sold it.
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s *Waiting to be Installed* 220/222 .581/.581 114lsa
2007 Hyosung GV650 The Little 650 Cruiser that could. 12.7 at 104 Mph
2004 Buell XB12s
Originally Posted by LamboDoNoMo
I had a '93 I bought new. Very tough trucks.
I just wanted to do something different with the swap. Everyone has seen a v8 S-10, but you never hear of an LS1 Hardbody.
'92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
http://videos.streetfire.net/video/d...d700c6401f.htm
working on '94 Nissan Hardbody with LS motor & th-400.
v-8 swap in my '04 Silverado also in the works.
This would look really good with the wheels tucked in a little more and hammered to the ground! Can't wait to see what you come up with!
00' Ls1, TSP 228R - 228/228 .588/.588, Yank SST3200, Nelson tune, Nelson wiring harness,
s&p headers, custom radiator with e-fans,91 sub front end with billet grill and bowtie,autometer gauges, red and grey tweed interior, dual 2.5" flowmaster super 40, Dmh cut outs, 5"-7" drop,air shocks, 20" Intro twisted vistas, gaylords bed cover
Coming soon: Air ride with an SD raised front crossmember and 6 link canti out back
Nissan makes a good little truck. I have had a few.
99RCSB Sway bars bear brakes Mcgaughys lowering kit. Trick turbo, comp cam, patriot dual gold springs. Huge Oil cooler. 02 PCM, new FLT 4l85 PI converter. Handles like a vette but is faster. Yea its AWD. I still tow a trailer. TBSS for the Mrs. Yes I am likely to misspell a word or too and am not likely to be grammatically correct. No I don't care. 208º/214º .554"/.559" with a 114º lobe center .I need a better cam.
My dream project...
99 Silverado 1500 4x4 RC 4.8
4L60E, 3.73, Homemade CAI, 92oct Quik tuned,Nissan 200zx E-fans, Dumped exhaust... summed up one loud pig caller |[200K! on odometer|
Posting Permissions
