+ Reply to Thread
Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 35 of 35

Thread: 6.0 conversion in my 90ss

  1. #31
    Join Date
    Mar 2009
    Location
    East Hampton CT
    Posts
    38
    what should i look for for fuel delivery. i plan on throwin a fuel cell in the bed or getting a camaro tank and putting it in the spare tire area.

  2. #32
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    gotta have a pump that pushes at a minimum 60 psi and 255 LPH. Most guys just put a Walbro pump from a GrandNational in the stock fuel tank.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  3. #33
    Join Date
    Oct 2008
    Location
    Temple, Georgia
    Posts
    22
    To maintain good pressure, use a GSS330, which is just a higher output Walbro 255 which still fits in the stock location in the tank just like all the others.

  4. #34
    Join Date
    Mar 2009
    Location
    East Hampton CT
    Posts
    38
    i was wondering can i use the b&m shifter with 4l80e

  5. #35
    Join Date
    Oct 2008
    Location
    Temple, Georgia
    Posts
    22
    Im about to use a B&M Unimatic Shifter on my 4L60 with a manual valvebody and try to blow it up so I can justify a 4L80. lol.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts