+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13

Thread: Relays

  1. #11
    Join Date
    Feb 2007
    Location
    Sallisaw OK
    Posts
    2,194
    Very nice write up, thank you for doing it, helps me a lot.
    1996 gmc ext cab short bed
    6.6L 4l80e
    MY GARAGE

  2. #12
    Join Date
    Oct 2006
    Posts
    150
    Glad to stumble upon this write up. Shows how much I've paid attention to the front page lately. Can anyone help me out here? What I am trying to do is wire up a wet kit while using COS5 in EFILive. I want to wire it up to make sure that the solenoids don't get power if pin56 on the PCM isn't earthed (incase of relay failure). Grounding pin56 will retard timing and add fuel in the tune. The idea is that this ensures that the solenoids get a ground when the PCM is triggered. I have came up with a schematic here but I'm not 100% sure if this will work or not with the way the last relay is wired. Can somebody who is a little better versed in electrical care to give me some pointers? Thanks in advance.

    Attached Images
    13.4 @ 98mph. Cammed/Stalled/LTs/Tune and those lame 3.42s!

  3. #13
    Join Date
    Sep 2007
    Location
    Broken Bow, OK
    Posts
    1,434
    That should work fine, but I would connect the ground for the solenoids as close as possible to the PCM to minimize the possibility of a cut wire giving ground to the solenoids, but not the PCM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts