lol yea no doubt. Gonna take a lot more time to buy the rest of the stuff than it will be to build though
lol yea no doubt. Gonna take a lot more time to buy the rest of the stuff than it will be to build though
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
What do u have left to buy? It always comes down to money and time. Lol. I'm still buying parts to do the tubo build this winter. It's gonna take some time for me to put it all together because its gotta look good and work great. .
I heard that. I need to buy the axles, spool, c-clip eliminators, gears, install kit, brakes, have someone setup the gears and billet caps, need to buy wheels for the back, and cage. Im sure Im missing a few things but that's the bare minimum. Over $2500 right there. And my boy just put his meth kit up for sale and I think Im gonna get it lol
Last edited by o2camaross; 09-28-2013 at 06:56 PM.
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
Ya, sounds like ur going all out. What kind of track times do u anticipate with all the mods?
With the old suspension setup and before the weight reduction it went 10.9 @ 125 with a 1.67 60' with the small turbo (76/64) @ 14 psi and 3" exhaust. Since then I put a bigger turbo (80/77.5) and full 4" on it and it breathes so much better. I have no doubt it would've ran mid 10's at 15psi the way it was. Now with the suspension setup and weight reduction i would imagine low 10's on 15-16 psi and my goal is 9's with the stock 5.3 and current turbo. It should do it with around 750-775 rwhp which should be about 20-23 psi.
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
That would be awesome!
Not wasting any time are we lol.
4.8, TSP 220, 6L90 swap, 3400 Stall, 4.10s w/30" drag radial and T76 @ 16lbs.
Best ET 11.54@114 w 1.52 60ft
Raceweight 4905 lbs.
I try not to lol. Today I'll gusset where the stock rail and 2x4 rail meets and try to get a few things welded up. Then put the bed on and cut the wheel wells out and tub it but that wont be till next week probably
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400