Gears, Posi's, Lockers, Bearings, Axles, More!

[yournamehere018]

Hello, the Detroit lockers disengage when cornering, but the are kind of noisy and can jerk the vehicle a little. Detroit Truetrac differentials are very smooth.

Thanks

+1 Go for the True Trac. I bought one from Ron a while back and don't regret it.

Hey Ron, if I get gear whine only when I am decelerating does that mean the pinion nut needs to be tightened a bit more? It isn't a bad whine, and a local differential guy said that's all it will need. Just want to make sure so I don't have to pull it out and put in another crush sleeve.

[RONS MACHINING SERVICE]

+1 Go for the True Trac. I bought one from Ron a while back and don't regret it.

Hey Ron, if I get gear whine only when I am decelerating does that mean the pinion nut needs to be tightened a bit more? It isn't a bad whine, and a local differential guy said that's all it will need. Just want to make sure so I don't have to pull it out and put in another crush sleeve.

Hi, yes, a whine on deceleration is an indication the pinion preload is not correct. You can try to put a little more on the nut, but it is tricky to get it right without pulling it apart. There will be no way to measure the preload.

Thanks, Ron

[mwbrannen]

ordered from ron on (weds at 4:00pm) and had my order today at my door steps today (friday 11 am ) FAST SHIPPING THANKS AGAIN

[RONS MACHINING SERVICE]

ordered from ron on (weds at 4:00pm) and had my order today at my door steps today (friday 11 am ) FAST SHIPPING THANKS AGAIN

Perfect, Thanks for the order!

[skeet]

thanks Ron got the detriot yesterday

[RONS MACHINING SERVICE]

thanks Ron got the detriot yesterday

Great, thanks again for the order!

[f4tal]

Ordered 3.73s, trutrac, install kit, and bearings on wed at noon... got it today at 3:30!

Your the man Ron! Can't wait to get the truck back on the road.

[RONS MACHINING SERVICE]

Ordered 3.73s, trutrac, install kit, and bearings on wed at noon... got it today at 3:30!

Your the man Ron! Can't wait to get the truck back on the road.

Thanks for the order!

[mwbrannen]

i got the 4.56s in now, but i do have a little whine around 40-50.. its not to terribly bad.. could any harm come from this?

[RONS MACHINING SERVICE]

i got the 4.56s in now, but i do have a little whine around 40-50.. its not to terribly bad.. could any harm come from this?

Hello, aftermarket gears can be a little noisier than stock. As long as it is just a slight whine, it will be ok. Let me know if you have any questions or if there is anything I can do to help. Ron