Who Has The Biggest Cam In A Ls1 Or 6.0

[TXsilverado]

who has it and whats the specs? 5.7 AND 6.0'S ONLY!!! I DONT CARE ABOUT YOUR 408 THATS TECHNICALLY A 6.0 BLOCK

im planning on doing a little experiment here soon. my new transmission is on the way and im planning to have my converter restalled from 3600 to 4000 rpm.

i plan to take my truck to the track with that setup and make 3 passes.

over the next week im guna pull my 226/226 .584/.584 112+4 XER cam and install a 237/242 .603/.609 112+1 XER and have charlie wheatley tune her up guna take it out and make another 3 passes and compare the differences and post them up.

if i like the cam im guna pull it out and install a MS4 which is better suited for my heads (239/242, .649"/.609 111 LSA). i will make those damn 11's on motor

[1slow01z71]

This all spurred from the Valley Boys thread on pt?

[extendedplessure]

i have a buddy with an ms3 and a 3800 stall ran 12.3 hot weather in a single cab

[extendedplessure]

i have a buddy with an ms3 and a 3800 stall ran 12.3 hot weather in a single cab

edit on stock intake

[extendedplessure]

whats up with that man im from the valley

[NITROUS]

I'd like to see the dyno results. The larger cams on stock LS1's seem to lose peak torque and unless you can crank the RPM's up you can over cam the stock LS1. I'd like to see my cam specs on a 112 LSA. I heard it can make 450 HP plus over 6000 RPM and it's not the biggest cam on the block. Actually these are the cam specs I'm talking about: 228/230 .571/.573 112lsa. BTW, what RPM's are you pushing with a monster cam like that?

[ff_jeff]

Double thread FTW!!!

[DamnYankee]

This all spurred from the Valley Boys thread on pt?

That's what I was thinking lol...

[DamnYankee]

whats up with that man im from the valley

It's a compliment to the Valley guys - there are some FAST trucks down there...

[ducky]

Someone post the link over here to that thread on pt.net. Im interested and dont feel like searching for it over there..