Originally posted by ridnlow@Feb 3 2004, 02:21 PM
Thanks for the help Allen.. i knew you had done something similiar to your truck. What about the stock drive shaft? I think my buddy already has a V8 radiator so that isnt a problem.. and im guessing have to go with a stock 5.3 or aftermarket air intake
I went with a denny's shaft after breaking three of them. It wasn't the power, it was the 4.10's and high speed that broke them.
Your stock one will work fine until you can get a good one.

Also, that stock v8 radiator will work fine too.

You will be able to buy a 255lph fuel pump for a fbody, and the unit will go right in the assembly that is in the gas tank. You need 60psi. The trucks come with a fuel regulator.

Ask away and I'll answer the best i can,

good luck,

allen