LY6 cam choice NA and going FI will the LS9 work both?

[kerrige]

Again, the ls9 cam is picking up around 40 horses on a 6.2. Should be similar on an l92 headed 6.0

Okay but that isn't even close to the 75hp gains possible with a well speced cam.... I am sure you got a whole lot more than 40hp with your cam.

[pl4yboy]

Okay but that isn't even close to the 75hp gains possible with a well speced cam.... I am sure you got a whole lot more than 40hp with your cam.

Right, but the LS9 is the best budget cam possible. A full swap, springs and all, for under 400$. Also, no stall is needed.

[sand man]

Right, but the LS9 is the best budget cam possible. A full swap, springs and all, for under 400$. Also, no stall is needed.

thats my #1 reason for thinking about this cam, other choices will add up to at least 1200$ cam 450+springs 250 + rods 150 + front cover and sproket 80

although i have the older cam form the 5.3 like push rods,springs,front cover,melling oil pump,new timing chain...actually all i need is a cam and gaskets+ seals...

any opinions?

[sand man]

this is my old motor

if you can see any damage that i messed please point it out











the LY6