+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: gauge swap... wih tranny temp gauge

  1. #1
    Join Date
    Nov 2011
    Location
    NH
    Posts
    109

    gauge swap... wih tranny temp gauge

    my guage cluster is sh** the bed and im gonna get a new one. i was wondering since i did a 4l80e swap in my 99 sierra nbs, if i could get the guage cluster with the tranny temp guage. and what do i have to do to make it work.... thanks

  2. #2
    Join Date
    Jan 2008
    Posts
    8,031
    Should be just plug and play

  3. #3
    Join Date
    Apr 2008
    Location
    Hill Country, TX
    Posts
    310
    make sure and get what that starts really low. My tranny temp won't even register anything unless I am at the track, never have seen anything on the street. My gauge starts at 140 deg i think, but this may be due to my 2 - 30K super coolers...
    --2013 CC Z71, Edelbrock charged, cam, long tubes, 4.5" Zone, 285/70/18 KM2s on Gear Big Block, Kenwood system, LineX, Retrax, Katskinz, NFab.
    --2012 Dmax CC Z71, Cognito UCAs, braces, Fox 2.0, LineX, Nfab, Retrax, Ranch Hand Front/Back, Custom Katskinz, Black Gear 18x9 wrapped in 285/70/18 Toyo MT.

  4. #4
    Join Date
    May 2010
    Location
    so cal.
    Posts
    96
    Quote Originally Posted by kbomhower View Post
    my guage cluster is sh** the bed and im gonna get a new one. i was wondering since i did a 4l80e swap in my 99 sierra nbs, if i could get the guage cluster with the tranny temp guage. and what do i have to do to make it work.... thanks
    I just recently went with the escalade cluster in my 2000. I like the look and the fact that it has trans temp and goes to 120mph. Found mine for $150 at a local junkyard. Plug and play. You can use one from a 99-02.
    SOLD:1992 ECSB Silverado lm7 5.3 Swap, TR220 cam, Circle D 3200stall, CBM street tune, Schoenfeld LT's, LS1 efans, transgo hd-2 60e, custom CAI, Autometer gauges

    Best 1/8 E.T. 8.86 @ 77.8 on 275/60/15 MT ET Streets with 1.92 60 ft.

    2000 RCSB 4x4 Lq9 swap...stock except mild 4l65e....for now

  5. #5
    Join Date
    Nov 2011
    Location
    NH
    Posts
    109
    so the temp sensor is alreasy in my truck i just dont have the guage in my cluster now?? so swaping to the guage cluster with one in it should work without running anything to the transmission itself??

  6. #6
    Join Date
    Dec 2004
    Location
    San Antonio, TX Area
    Posts
    1,741
    They are already wired for the temp gauge. Do you have the steering wheel controls?
    "ALisSa1 Silverado"
    1990 Chevrolet RCSB 2002 Chevrolet Camaro LS1/4L60E
    Scrimpin Ain't Easy
    ( . Y . )


  7. #7
    Join Date
    Nov 2011
    Location
    NH
    Posts
    109
    nope i got a 99 the first year of the nbs. thats why i was curious if i had the wiring already there just no guage. id like to get some esco guages or anything thats got the trans temp and goes to 120mph.

  8. #8
    Join Date
    Feb 2011
    Location
    Barnwell, SC
    Posts
    471
    I've got a 99 and put a denali cluster in. It works fine, so you're good. Got mine off of ebay for $80 shipped.

  9. #9
    Join Date
    Feb 2011
    Location
    cleveland
    Posts
    485
    Will this work on a 2003?

  10. #10
    Join Date
    Feb 2011
    Location
    Barnwell, SC
    Posts
    471
    Yeah. Just get an 03 and up cluster.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts