if i take the fan and clutch off the motor do i have to change the pulley or can i leave the one that is on it now?
i unscrewed the clutch/fan off of the pulley already. i was just going to find a nut or something to screw in its place just to dress it up but if the pulley/water pump needs to be changed then i guess thats what i will do.
Nothing else needed. S and p makes a nice cover for the threads
just leave as is....no nut needed.
good luck with the project...should be fun!
1968 GMC - Carb'd and cam'd 6.0 LY6, 200-4r, 3.73 posi 12 bolt
2006 TrailBlazer SS - 13 sec. grocery getter
cool thanks. you have a link or somehing for them?
anyone know if i can somehow hook up cruise control on this thing? i would like to have it but its not a necessity.
most likely need f-body oil pan to go with xmember your using
yea nathan said i will need one because the truck pan will hit the rack/pinion.Originally Posted by jeremys14
anybody have any input on the cruise control?
i'm pretty sure there's a write up some where on here about cruise control.
i have the cruise control off my truck & the one from the camaro if you want one.
i have the cruise that came with the motor. thanks for the link ray
Posting Permissions
Reply With Quote