I did some searching but came up empty handed, does anyone have pics of there swaps with relocated coil packs? Was thinking about moving them to clean the engine up a bit.
I did some searching but came up empty handed, does anyone have pics of there swaps with relocated coil packs? Was thinking about moving them to clean the engine up a bit.
Nice thanks Jeff! That's quite the setup you have there, looks sweet!! What wires did you use with the coils mounted behind the engine?
I was able to reuse the Gen1 5.0 Vortec wires. That worked out very well because they were low mileage MSD wires. If I wre to do it over---Instead of all 8 coils next to each other and almost touching; I would have about a 2inch space in the middle (4coils-space-4coils) The wires would have a little more wiggle room like that.
Jeff
98 GMC RCSB 2wd, 100% internally stock 305, w/twin T-3 junkyard turbos,Ramjet intake w/42lb inj,12200411 PCM. 4675lbs w/me in it. Best time in 5 passes 13.01@110
Cool thanks jeff, ya I am leaning reared moving the coils and think that is an easy solution to cleaning the engine up a bit. Thanks for the info and pics! Much appreciated. -Neil
Posting Permissions
Reply With Quote