Could use some help with how to remove the upper water pipe on a 2004 5.3 (want to modify the pipe)
Thanks
Could use some help with how to remove the upper water pipe on a 2004 5.3 (want to modify the pipe)
Thanks
Upper water pipe? The steam vent that goes from head to head? If so, two little hex bolts on each head hold the fittings down.
2006 SilveradoLittle Black Bitch
Or are you talking about the upper pipe on the water pump?
Sorry, should have been clearer...the upper pipe to water pump. Thanks
IS that the one going to your heater core.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
No...it goes to the radiator (pipe in picture)
Last edited by deelli; 12-28-2011 at 08:56 PM.
Im pretty sure they are pressed in, why do you want to do to it and why?
i turned mine to clear a re-located a/c compressor. i just used a propane torch to heat the aluminum. it got very loose, would have pulled out easily. id imagine you could heat back up to put back in. you can barely see it in this pic, its pointed straight forward now
020 (3).jpg
Using the engine in a 63 Nova and want to route the radiator hose towards the drivers side and point downwardOriginally Posted by Jess
If nothing else, maybe cut and bead roll the existing pipe the use a mandrel bent pipe connect with hose and clamps. Unless you're going for the clean look of a well made turnaround pipe
Posting Permissions
Reply With Quote
