231/ 235 Cam

[CHEVROLADE]

I wish I had a graph of how this cam performed on a dyno to see where the power comes in and leaves. I know your truck ran strong on it, but I don't have 4.56 gears and I'm pushing a LOT more weight. I feel like it doesn't have enough split for what I'm interested in. Who spec'd it?

yea i never got it on a dyno,well we did but since i dont have manual control of the 6spd...it wouldnt get a reading...Pat G spect........but i have found out when i drop the column shifter down once ,it will stay in 4th gear...so maybe Allen can get a reading off a 4th gear run?not sure.....

[pl4yboy]

yea i never got it on a dyno,well we did but since i dont have manual control of the 6spd...it wouldnt get a reading...Pat G spect........but i have found out when i drop the column shifter down once ,it will stay in 4th gear...so maybe Allen can get a reading off a 4th gear run?not sure.....

Do you still have the cam card? I'd like to see what lobes its on. Also need to know what pushrod length he spec'd it for. I know Pat likes to do some funky pushrod sizes from time to time depending on the lobes.

My real concern is not having the gear for this cam. I have the stall, but not the gear. How high did you spin it?

[CHEVROLADE]

damm i have that cam card somewhere i know i can find it.....stock pushrod lenght...i added that vid up top that was spinning at 6500 ...its currently at 7300....ill post a new vid tomorrow spinning up there...its crazy fun with the 456s..

[pl4yboy]

damm i have that cam card somewhere i know i can find it.....stock pushrod lenght...i added that vid up top that was spinning at 6500 ...its currently at 7300....ill post a new vid tomorrow spinning up there...its crazy fun with the 456s..

I'm thinking I'll only spin it to 6500-6800. Text me bud. 9184706988

[George C]

the specs on that cam arent bad for a turbo cam FYI....my turbo cam isnt to far off from those specs

[farmtruc]

Cam is a little off if you do the calculation, but I told him to run it anyway, should be pretty decent.