WTB C notch

[zeake]

Well I am fed up with slamming into the bump stops when I have no air in the helper bags. Anyone have a c notch. lmk what you have and how much. Would like to see pics. Pm me or email me zeake13@yahoo.com
Thanks

Jake

[RPM Graphics]

are you looking for a bolt in or weld in notch?

[zeake]

are you looking for a bolt in or weld in notch?

Either. The key is price. I can weld it in with no problem and was planning to weld a bolt in for the extra strength. I do tow a 17" enclosed trailer occasionally and every once in a while a 30' travel trailer so I need the strength. Some notches can be had for 69$ but I am a little scared of those.
I forgot to mention my truck is a RCSB 99 model.

[RPM Graphics]

as long as they're not too thin of metal & you weld it up good you should be fine with just about any notch. most places sell the notches in pieces
i know mike at dallas hot rod parts sells several different size notches. suicide doors sells a few different sizes also, & Nfamus sells them already welded together & you can cut them down to the size you need.

[zeake]

I have seen a bunch of different ones. I just don't understand why the mcgaughys 33007 is so dam expensive compared to the 69 dollar ones.

[RPM Graphics]

yeah, they're really proud of that notch, lol!!! most bolt in notches are more expensive then weld in notch's. that one is also made for the curve/bend in your year truck, where as most weld in notch's are just straight.

[zeake]

I would prefer the mcgaughys 33007 notch if anyone has one used. I can justify used a lot more easily to my wife.

[RPM Graphics]

i'll keep an eye open for you.

i think DJM also makes a bolt in notch for your truck.

[zeake]

Djm does have one, just looked it up. About 135 at stylin trucks

Thanks for keeping an eye out. I'd probably go with either of the two.

[99 lives]

I have a used set of DJM notches. Dunno what it'd cost to get'm to you tho. They dont weigh a whole bunch.