862's or 706's

[sprayedenali]

you two are making me blush.....

[midnight04]

I have probably around 10 sets of 4.8/5.3L heads SPM cast and sand cast. (Sand 862/ SPM 706) You are in AZ? Come and pick out a set Ill charge you.................Nutn....As I dont really port the 4.8/5.3L heads much any more. And no that does not mean every one gets a free set of heads. I just helping him out. Bring your old head and ill fix it for you.

[bangbangskeetskeet]

Damn that's a hell of a deal! Looks like I might be making a trip out to the west side soon haha.

[SS-PEREZ]

I have a set of 862 heads if your still looking

[skeet]

why not have a shop weld the hole up and retap it, i know if craig can repair the damage to my ls3 head i know this could be easily repaired.. ill post pics once my head has been repaired, a good aluminum welder that knows how to weld aluminm could fiix that for less than 50 bux easy

[bangbangskeetskeet]

I have a set of 862 heads if your still looking

I am just waiting to hear back from the guy above actually. Been trying to meet up and pick up a set I just havent had time, and when I do have time hes got something going.

why not have a shop weld the hole up and retap it, i know if craig can repair the damage to my ls3 head i know this could be easily repaired.. ill post pics once my head has been repaired, a good aluminum welder that knows how to weld aluminm could fiix that for less than 50 bux easy

Yeah that has crossed my mind also. Only problem with that is that the head needs to be off. I will probably end up having them taken care of once I get the other set of heads....may even get them ported while Im at it.

What happened to your head David?

[skeet]

I am just waiting to hear back from the guy above actually. Been trying to meet up and pick up a set I just havent had time, and when I do have time hes got something going.



Yeah that has crossed my mind also. Only problem with that is that the head needs to be off. I will probably end up having them taken care of once I get the other set of heads....may even get them ported while Im at it.

What happened to your head David?

well as you know ( i think ) i went with LSA heads for the thicker deck, well livernois did the cnc which they used a ls3/l92 program, something happened and made the intake runners to thin, then after porting they became thinner well after install i had a smoking issue on driverside ( dual exhaust ) come to find out i had cracks up the runner to the valve guide , sooo livernois is cncing a new casting, then James at rage will port them like my last heads, which the one that got damaged is being repaired for a nother setup i have.. which is a l2 engine