+ Reply to Thread
Results 1 to 10 of 11

Thread: Hbeam rods, pins, and TBs

Hybrid View

  1. #1
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751

    Hbeam rods, pins, and TBs

    I have some things left over from my 370 build.
    1st up is some forged H-beam rods. They are 6.1 the length is stock and it takes a .927 pin. My engine builder said they look like skat but are more than likely Pro Comp. HE also said they should be good for the same HP rating as eagle or skat. Price is $300.00 + shipping





    Next is the wrist pins that came with my Mahle pistons. They are .927
    Price is $30.00 + shipping


    Next is 2 3bolt truck DBW TB's. One has been ported and polished. The P&P'ed one as a crack on the plastic cover for the blade motor and gears. It can be replaced with your current one just by drilling out the rivets and putting 4 small bolts in their place.
    TBs Stock $30 + shipping

    P&P TB $50 + shipping.



    Last edited by SLO TRUCK; 03-25-2011 at 06:22 PM.
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  2. #2
    Join Date
    Nov 2007
    Location
    GLENDALE,ARIZONA
    Posts
    213
    Those Rods are Procomp, (I can tell by the bolt #'s) and are good to 800hp. Procomp supplys Probe with H-Beam rods for their kits. Just a FYI I get them all the time and never had a problem.

  3. #3
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751
    Thanks for the info.
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  4. #4
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751
    BUmp up top
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  5. #5
    Join Date
    May 2008
    Location
    Crowder, OK
    Posts
    8,005
    All 78mm TBs?

    1969 Chevy RCLB C10 350/TH400 SOLD
    2007 Chevy RCSB 4.8 4x4 LS SOLD
    2008 Chevy RCSB 5.3 4x4 LT SOLD
    2010 Chevy CCSB 6.2 4x4 LT SOLD
    2005 GMC CCLB DRW 6.6 Duramax 4x4 191,000 and counting
    2013 FORD CCSB F350 6.7 Powerstroke 4x4


  6. #6
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751
    Yup sure are. I should have but that in the 1st post
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  7. #7
    Join Date
    Jul 2008
    Location
    Mesa, AZ
    Posts
    5,979
    I wish that ported TB was DBC.
    T-RAV
    99 GMC | 5.3 | Skinny White Guy Tuned

  8. #8
    Join Date
    Nov 2007
    Location
    S.A. Texas
    Posts
    3,751
    Ya it would have been on your truck already.
    Name: Mark,
    God created turbo lag so nitrous trucks could have a chance.


    http://www.ls1truck.com/forums/my-ga...tml#post274877

  9. #9
    Join Date
    Jul 2008
    Location
    Mesa, AZ
    Posts
    5,979
    True story. Maybe I will get a spare and send it off to you.
    T-RAV
    99 GMC | 5.3 | Skinny White Guy Tuned

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts