+ Reply to Thread
Results 1 to 10 of 22

Thread: front door speaker questions

Hybrid View

  1. #1
    Join Date
    Mar 2010
    Location
    Abilene,Texas
    Posts
    38
    i was kind of curious about hiding them with the amps but wasnt sure if it whould be a good idea. on having them so far away. also lechez how did you mount them on the back panel behind the seat. anything special i need to do where it wont leak or something

  2. #2
    Join Date
    Dec 2008
    Location
    san antonio TX
    Posts
    1,365
    Quote Originally Posted by CD82 View Post
    i was kind of curious about hiding them with the amps but wasnt sure if it whould be a good idea. on having them so far away. also lechez how did you mount them on the back panel behind the seat. anything special i need to do where it wont leak or something
    i got a piece of left over wood from the sub box i made, and screwed the amps to it. on the back side of the board i stuck some velcro tape on both wood and back wall of the truck and stuck great. didnt have to drill any holes on the truck. its a clean install and hard for the thiefs to get to. i have to remove the back seat to get them out or to adjust the settings.
    Last edited by lechez71; 02-27-2011 at 03:47 AM.
    1982 c10 lsx swaped, NP tuned, true duals, 4:11s, trutrac, e-fans, CAI

  3. #3
    Join Date
    Mar 2010
    Location
    Abilene,Texas
    Posts
    38
    how much velcro tape? im guessing pressure of the seat help keeps them attached? when ya hit bumps it does not slide or anything?

  4. #4
    Join Date
    Sep 2007
    Location
    Broken Bow, OK
    Posts
    1,434
    I did the same thing using a piece of MDF and velcro behind the seat. I did the seat mod, so I can fold it down to access the amps though.

    I have my crossovers for the fronts mounted inside the center console. If you have the full center console there is a lot of room under the front part.

  5. #5
    Join Date
    Mar 2010
    Location
    Abilene,Texas
    Posts
    38
    seat mod? not sure what that is could you please explain ?

  6. #6
    Join Date
    Sep 2007
    Location
    Broken Bow, OK
    Posts
    1,434
    You trim the tabs that hold the back of the seat, so that when you are folding it up it can slip out and fold down if you want. Let me see if I can find a link to the how-to.

  7. #7
    Join Date
    Sep 2007
    Location
    Broken Bow, OK
    Posts
    1,434
    OK here is the link to the thread on another forum:
    http://www.gmfullsize.com/forum/showthread.php?t=92691

    Note that your back wall isn't going to be trimmed out like the one in the picture, that is something you would have to do if you want it to look like that.

  8. #8
    Join Date
    Jun 2010
    Location
    norman,ok
    Posts
    90
    Quote Originally Posted by PitchBlackC3 View Post
    I did the same thing using a piece of MDF and velcro behind the seat. I did the seat mod, so I can fold it down to access the amps though.

    I have my crossovers for the fronts mounted inside the center console. If you have the full center console there is a lot of room under the front part.
    Where is the room in the console? I looked under the cup holder part and there is a huge Bose amp. that goes almost all the way to the back. In front of the amp. all the way to the very front is some kind of enclosure for a Bose speaker, I asume it is a sub it has 2 2wire conections on it 1 on each side. Am I looking in the wrong place?

  9. #9
    Join Date
    Sep 2007
    Location
    Broken Bow, OK
    Posts
    1,434
    Quote Originally Posted by mrfister View Post
    Where is the room in the console? I looked under the cup holder part and there is a huge Bose amp. that goes almost all the way to the back. In front of the amp. all the way to the very front is some kind of enclosure for a Bose speaker, I asume it is a sub it has 2 2wire conections on it 1 on each side. Am I looking in the wrong place?
    Ah, yeah mine is different. 2001 didn't have BOSE and mine has a Denali console which is slightly different.

  10. #10
    Join Date
    Jun 2010
    Location
    norman,ok
    Posts
    90
    Oh OK. Thanks

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts