Deal for somebody near houston...

[408.Luke]

how hard would it be to mod one of these to work in an fbody?

you would have to cut all the brackets off of it and weld F-body brackets on, and that would only work if this rear end was the right width, if it was a little narrow it would be ok cus you could run a bigger off set wheel (and have a nice lip) but for the nbs trucks they are like 6in to narrow or something like that

[ss454327]

you would have to cut all the brackets off of it and weld F-body brackets on, and that would only work if this rear end was the right width, if it was a little narrow it would be ok cus you could run a bigger off set wheel (and have a nice lip) but for the nbs trucks they are like 6in to narrow or something like that

Sounds just like building a 12 bolt to me. How hard would it be to change it to fit the 5 bolt wheels?

[408.Luke]

Sounds just like building a 12 bolt to me. How hard would it be to change it to fit the 5 bolt wheels?

new axles from moser with a 5 lug pattern. or redrill the stock axles