check the pink wire at the trans harness to see if it has voltage. I believe it is pin E in the plug for the trans. The wire is coming from the IGN O fuse in the fuse block inside the driver side door. that is the power supply for the trans electrical. I had the same problem you did, same codes and everything. so i just spliced in that pink wire just after the fuse at the fuse block and ran a new wire down to the trans harness and spliced it in. I dont think mine was the igntion switch tho cause when i ohmed the wire from trans to fuse block it read OL which means it was either cut/pinched/frayed.
SOLD
Reply With Quote