4.8 5.7 ls1 swap questions

[Blue01]

Its a daily for now so it will get a cam thats good with a 3000 stall. One day it will get a real mans cam and ported heads.
Any suggestions for a cam for now

[96/chevy/pu]

The ls1 intake is less superior flowing than say a ls6 or fast intake, not many people run them if any. Also since the will be in a truck you most likely want to run the truck intake because the downside to the car intake even though you gain top end, you loose a decent amount of torque which never helps a fullsize truck.

your starter and flex plate will swap over.
Order a converter for the truck tranny.

I stayed with a car intake with my LS1 swap in my ECSB P/U from power plus seems to work well. Real strong mid & upper end & if I lost any lower end I'll deal with it because its shoots off the line plenty hard and thats with my stock stall. Others have had problems with gasket leak. so far I have none but I plan to go to FAST intake soon as I can spot a good used one. I also will be removing my LS1 to replace bearing and upgrading cam and such, now that I found all my bugs on install from 5.3

BB

[Blue01]

What do yall think about this cam?

cam specs :
Thunder Racing Custom Camshaft
"Reverse Split" - 230/224 .575/.563 111 LSA 2200-6800 RPM Power Band