+ Reply to Thread
Results 1 to 8 of 8

Thread: Penny just lost her dyno virginity

Hybrid View

  1. #1
    Join Date
    Jan 2009
    Location
    Round Rock, Texas
    Posts
    1,699
    Forgot you were a 5 speed
    cjriojas:if you're weather man is a 5 gallon bucket, YOUUUUUUUUUUU might be a redneck
    danger_ranger83: I see now why it cost so much to get a harness made... FML
    2boostedSilverado: I like Casey's rear end, I want to chat with him about it

  2. #2
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    Quote Originally Posted by PitchBlackC3 View Post
    That is one ghetto rigged dyno.
    you shoulda seen the first truck to roll up there:
    2004-ish quad cab Ram 2500 with 8" lift & 39" swampers. the owner was sweatin bullets as the dyno guy pulled it up there


    i know, it's a gas dyno, but most of the trucks there were Cummins & they all wanted to run... so they did. that green one in particular only got to around 42psi due to lack of resistance when he normally gets to about 65psi (meth kicks in @ 50)

    Quote Originally Posted by Duct_tape123 View Post
    Forgot you were a 5 speed
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

  3. #3
    Join Date
    Jul 2009
    Posts
    168

    Thumbs up

    Sounds right on. Before my cam and nitrous I did 250. 285. That was with longtubes and a wait4me mailorder tune. But you willl see a big improvement with the cam and live tune. Good luck hitting 300 hp! But torque is what u want!
    2002 Under Construction Again!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts