DBW Throttle body, 3" header reducers, LS adapter plates.
Early 80's Blazer bucket seats, recovered and almost like new. $40.00 picked up only.

88-98 OEM hood. free to whoever will come get it out of my way. Recently stripped and epoxy primered (looks better when its not covered in body filler dust)

Stock truck injectors from an 05 silverado. I don't know what these are worth so just make me a reasonable offer.

Jegs nickle plated fittings both are 1/4 NPT X 3/8 barbed. $7.00 shipped for the 90* $5.00 for the straight fitting.

Energy suspension poly ball joint boots, OBS. $8.00 shipped PENDING

DBW throttle body from an 05, has around 30k miles on it and worked great but I just switched to a cable setup.Make me an offer.

Standard LS adapter plates. I changed to a 1" set back. I welded in a bolt that would allow me to turn them upside down on the opposite sides and set the engine forward enough to keep the A/C in the stock location but that led to drive shaft issues so I changed back, the studs don't interfere with normal mounting. I have most of the bolts that came with the kit. $15.00 shipped

2005 truck oil pan, windage tray, and pickup tube. The pan has some scrapes on the bottom from the truck it was in being so low but it is structuraly good. SOLD

Jegs 3" header to 3" pipe reducers, missing a flange in the picture but if anyone is interested I will round up another. $20.00 shipped

Passenger side only Shoenfeld conversion header. I screwed up the drivers side header and had to order a new set. Has a 3 hole collector flange welded on. 40.00 plus shipping.

All prices are best offer, I take paypal. feel free to request additional pics or info. Shipped prices are lower 48 only.
Last edited by low91; 10-20-2009 at 01:33 AM.
1991 Silverado-L33 5.3L, 212/218 .557 .562 115+4, ASP under drive pulley,180* thermostat, 90mm truck intake w/ LS3 throttle body. Shoenfeld conversion headers and duel Flowmaster exhaust. Performabuilt LVL 1 transmission and 23-2500 stall converter.