yay if you told him to turn it on he will. if you didnt request it then he might not have
yay if you told him to turn it on he will. if you didnt request it then he might not have
04 supercrew 5.4 3 valve-magnaflow catback
formerly 02denali 12.79@107
Yeah I told him I have the LS1 e-fans and bought his harness that he makes...so I don't see any reason why he wouldn't.Originally posted by 02Denali@Apr 14 2005, 08:07 PM
yay if you told him to turn it on he will. if you didnt request it then he might not have
03' Tahoe...stock for now
Touch the pcm blue wire to the chassis/ground. Do both fans come on low? If so, the harness is fine, if not, we need to get you another harness (easier than troubleshooting).
If they come on put the pin in blue 42, the fans should come on around 189deg for a 160stat and 205 for the stock stat.
I'll get you fixed up right away if anything is wrong.
thanks,
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
Thanks Allen. I grounded the blue wire and the fans came on so it's not the harness. I put the pin back into 42 on the blue side and let it heat up....still not coming on. Well maybe I will have some luck when that new PCM comes this week. Thanks for all the help everyone.Originally posted by farmtruc@Apr 14 2005, 11:05 PM
Touch the pcm blue wire to the chassis/ground. Do both fans come on low? If so, the harness is fine, if not, we need to get you another harness (easier than troubleshooting).
If they come on put the pin in blue 42, the fans should come on around 189deg for a 160stat and 205 for the stock stat.
I'll get you fixed up right away if anything is wrong.
thanks,
-Pete-
03' Tahoe...stock for now
good luck man
02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...