And So It Begins, Tear Down&rebuild

[Wtfan18]

between 30 and 40hps is what im hoping for.

is that proven or are you just guessing LOL...

[Botlfed]

is that proven or are you just guessing LOL...

pretty sure those are proven numbers somewhat thats why i gave a 10hp range but as soon as its finished ill hit the dyno and we'll see if its proven.

[Wtfan18]

pretty sure those are proven numbers somewhat thats why i gave a 10hp range but as soon as its finished ill hit the dyno and we'll see if its proven.

if i wanted to do a swap such as that would i need a different size cam or what?? i notice yours it a tad bigger than mine... and your durations are a bit more radical...

[mean05]

if i wanted to do a swap such as that would i need a different size cam or what?? i notice yours it a tad bigger than mine... and your durations are a bit more radical...

the cam just means he needs a little more stall, most people see 10-15rwhp from the tbss intake alone and a nice p&p and valve job done on some stock heads will pick you up a few hp prob another 10-15, you can also have them milled a lil bit to bump compression and get some hp that way

[Wtfan18]

the cam just means he needs a little more stall, most people see 10-15rwhp from the tbss intake alone and a nice p&p and valve job done on some stock heads will pick you up a few hp prob another 10-15, you can also have them milled a lil bit to bump compression and get some hp that way

so essentially i could put one on my truck and have no issues. and acutally gain power and make the motor look better all in 1 haha. what does a P&P and a valve job run for $$ typically?

[Botlfed]

its goin to cost me about 150-200 per head.