need help wiring!!

[RedHeartbeat]

Put a test light on them and see if they light up when you turn the key on, thats the best test you can do.

[Wtfan18]

Put a test light on them and see if they light up when you turn the key on, thats the best test you can do.

Okay ill try that! thanks greg.

[knute_gis]

Which wire are you splicing the vss into for your speedo?

I guess it would be coming out of the stock computer.

[Wtfan18]

Which wire are you splicing the vss into for your speedo?

I guess it would be coming out of the stock computer.

i dont need to or so i was told. my stock VSS sensor plugs right into the t56 someone correct me if im wrong... ive already plugged it in.

[Wtfan18]

also i spoke with Jonathon at Nelson Performance today. as a reference for anyone doing these. he told me like greg to check the pink wires with a test light to ensure you splice the correct one. it should have 12v when the ignition is in the on position. also as far as the FUEL PUMP POSITIVE WIRE GOES he said use a test light and find the 12v wire and trace it back to the fuse center and attach the red wire on the new harness. i did that last night but am going to double check it tonight to make sure its 12v with a test light. other than that i hooked up the stock starter solenoid wire on the 4.3 harness and will not connect the purple wire as it just needs to crank the starter over. jon also said this was fine. the 2 green wires one is the back up lamp wire i will most likely not even bother to hook this up and there other is for an auto trans so i do not need it. i am putting a battery in the truck tonight and testing it all out who knows i may even get a little crazy and try to start it haha.

also i dont know if anyone here knows but i used brass compression fittings to join my 5.3 fuel lines to my 4.3 fuel lines this should work correct? i really tugged on them and couldnt get it to pop out. i know they need to handle 60 psi but that shouldnt be an issue right? other than that i just need to verify my grounds. does anyone have a list of the needed ones?

thanks guys ill get more pictures up of the wiring soon.

[knute_gis]

Any updates on your wiring?

[Wtfan18]

by tomorrow there will be. im going to hook the ignition up tonight test the wires etc. finish the grounds and turn the key hopefully tomorrow if all goes as planned!