I need some help picking out some mid length headers for my 4.8L any suggestions would be alot of help thanks I am looking to do this over the next 7 days.
I need some help picking out some mid length headers for my 4.8L any suggestions would be alot of help thanks I am looking to do this over the next 7 days.
What are your future plans for your truck? Do you eventually want to go with a turbo or supercharger? Or are you wanting to go with just motor and maybe some spray? It makes a difference in the stuff you will need.
2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive
I will be going with an rear mount STS later.
If you are going with an STS, then you don't want to get headers. I would look into getting a trans cooler, shift kit (may need to get built tranny later with STS), and definitely a Nelson tune for now.
2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive
keep your stock manifolds, they will hold the heat better...the money saved start buying hard parts that are known to break...i.e. G80 and tranny
06 silverado CC Volant CAI/ Corsa Sport exhaust
dynatech supermaxx headers/cats
LPE GT2-3 cam/ Comp 918's/ Rods
Eaton LSD 3.73's
IAT Shocks
DANNY TRANNY w/2800 TCS billet verter
275HP and 293TQ Pre Cam
314HP and 303TQ post cam
IF you do want some headers dont go with the mid-lengths you might as well just spend the little extra $ and go with long tubes for the complete gain out of it
2012 F-250 XLT/FX4 RCLB 6.7 Powerstroke
H&S XRT Pro Race(550hp/1100tq)/ 4" flopro exhaust/H&S EGT kit/SPE Full diff unlock/S&B CAI/H&S motorsports upcharge pipe kit/ DPF,CAT,EGR,UREA Deleted/Icon 3.5" Lift-Vs 2.0 shocks/PMF DSS w' Bilstein 5100s/Icon Adj Track Bar-upgraded steel bearing/RIGID LEDs/Kenwood DNX570HD w/idatalink maestro/Hertz5x7s/Memphis 12" slim/500.1 JL slash amp/Recon f250 led emblems
Eh, go with some Pacesetter ceramic coated Long Tubes and wrap them. Make sure to wrap them BEFORE you put them on...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
