torsion bar drop

[SCIV]

I want to lower my truck with the torsion bars but I've never messed with them before. I've heard of people raising their truck that way but don't know anybody that has dropped one.What I need to know is how far, what to watch out for, and the best way to go about doing it. Oh and is it going to affect the ride any.

I got a 2000 GMC 4x4 5.3 with stock wheels.

Get a set of 3/4 or 1 ton torsion keys, that will give you almost 2" in drop. That is what I run.

Side note, your 1/2 ton keys on a 3/4 or 1 ton give almost 2" of lift.

[banker099]

Get a set of 3/4 or 1 ton torsion keys, that will give you almost 2" in drop. That is what I run.

Side note, your 1/2 ton keys on a 3/4 or 1 ton give almost 2" of lift.

where can i buy these?

[Jeremy K]

Get a set of 3/4 or 1 ton torsion keys, that will give you almost 2" in drop. That is what I run.

Hey what year did your keys come off of? I didnt know I could get 2 inch of drop out of 3/4 ton keys that cool. Whats your ride like? i was going to crank my stockers down but now I think im going to go that way. Thanks.

Banker099 I might have a couple sets I will let you know if Im going to sell any of them.

[banker099]

Hey what year did your keys come off of? I didnt know I could get 2 inch of drop out of 3/4 ton keys that cool. Whats your ride like? i was going to crank my stockers down but now I think im going to go that way. Thanks.

Banker099 I might have a couple sets I will let you know if Im going to sell any of them.

yeah i have an 05 vmaxx that needs lowered let me know how much

[Jeremy K]

Do I need special tools to get these keys out and to change them? Does anyone have a link to a site that show how to do it? Thanks guys.