I picked up a well used 6.0 to swap into my 68swb truck. Plans are to keep things simple (mild) & the truck is used for work as much as it is for play.

So..... Since it most likely won't see over 5,500rpms, I'll reuse the 317 heads & stock intake since the gains are minimal vs cost to upgrade. The truck will get some 1.75 ~ 1.875 headers w/2.5" true duals + has a 12bolt w/3.73.s & 29" tall rear tires.

I looked @ a couple of low-to-mid range power cams from known manufacturers trying to match recommendations given by site members but nothing matched exactly. I found some Crane grinds: p/n 1449561; Trk, SUV, RV; 216/224, .551/.551, 115lsa. Does this sound better than stock w/the balls to still tow a load?

Those that offered cam specs: Any specific manufacturers grinds or combos I should consider?
Thanks in advance.